Epson ES-300C Бюлетень підтримки продукту - Сторінка 5

Переглянути онлайн або завантажити pdf Бюлетень підтримки продукту для Програмне забезпечення Epson ES-300C. Epson ES-300C 25 сторінок. Laser & non-impact printer error codes
Також для Epson ES-300C: Бюлетень підтримки продукту (19 сторінок), Посібник (8 сторінок), Додатковий посібник (15 сторінок), Посібник (11 сторінок), Бюлетень підтримки продукту (20 сторінок), Бюлетень підтримки продукту (14 сторінок), Бюлетень підтримки продукту (13 сторінок)

EPL-7000 cont.

[S] COPY END X/X

Multiple-copy printing is cancelled (you pressed the COPY END button when

the printer was off line).

[E] COVER OPEN

The printer cover is open or the imaging cartridge is not installed.

[S] DATA

The printer has received data but is not yet printing, or the printer has received

data and is off line.

[E] FEED JAM

Paper is not feeding into the printer from the specified cassette or has jammed

on its way into the printer.

[S] GRAPHIC DRAWING

Graphics are being created.

[E] ILLEGAL CARD

A card or cartridge in a particular slot cannot be read.

[S] INITIALIZE

The printer is being initialized (reset) to the factory settings.

[E] INSUFF. MEMORY

The printer has insufficient memory available for the task you have given it.

This error can also be cleared by turning the printer off and back on again.

However, it may be necessary to simplify the page you are trying to print or

add more memory to the printer.

[E] PAGE BUFFER FULL

Text or graphics data has filled the printer's buffer and an incomplete page is

ejected.

[S] PAPER FEEDING

The printer is feeding paper.

[E] PAPER JAM

Paper is not being fed into the printer or paper is jammed inside the paper

path.

PSB No: P-0077

Page: 4 of 11