Epson FX-880 - Impact Printer Короткий довідник - Сторінка 3

Переглянути онлайн або завантажити pdf Короткий довідник для Програмне забезпечення Epson FX-880 - Impact Printer. Epson FX-880 - Impact Printer 12 сторінок. Warranty statement
Також для Epson FX-880 - Impact Printer: Технічна специфікація (2 сторінок), Посібник з інсталяції (10 сторінок), Інформація про продукт (17 сторінок), Короткий довідник (16 сторінок), Посібник (11 сторінок), Специфікація (2 сторінок), Важлива інформація Посібник (8 сторінок), Посібник з монтажу (8 сторінок), Обмежена гарантія (1 сторінок)

Друкувати сторінку
Epson FX-880 - Impact Printer Короткий довідник
Light Status
Beep pattern
n
= on
lll
o
= off
lllll
f
= flashing
If a printer error occurs, use the control panel lights to determine the problem and solution.
Pause
Paper Out
n
n
No paper is loaded in the selected paper
source.
The paper is not loaded correctly.
Pause
n
The paper release lever is set to the wrong
position.
Pause
Paper Out
n
f
A single sheet of paper is not fully ejected.
Continuous paper does not feed to the
standby position.
Paper is jammed in the printer.
Pause
Paper Out
f
f
The print head is overheated.
Font
Tear Off/Bin
f
f
An unknown printer error has occurred.
Note:
The printer beeps once if you press a control panel button when the corresponding function is not available.
short series of beeps (three times)
long series of beeps (five times)
Beep pattern
lll
Load paper in the selected paper source, remove
and reload your paper, or select a different paper
source with the paper release lever. The Paper Out
light goes off. Then press the Pause button to turn off
the Pause light and the printer starts printing.
Beep pattern
lllll
Make sure paper is loaded in the paper path you
want to use. Then set the paper release lever to the
position for that paper path. If paper from another
paper source is loaded in the printer, press the
Load/Eject button to eject the paper; then move
the paper release lever to the desired position.
Beep pattern
lll
Press the Load/Eject button to eject the sheet.
Tear off the printed page at the perforation; then
press the Load/Eject button. The paper feeds to the
standby position.
To clear a paper jam, see " C learing Paper Jams" later
in this guide.
Wait a few minutes; the printer resumes printing
automatically once the print head cools.
Pause
Paper Out
f
f
Turn off the printer and leave it off for several minutes;
then turn it on again. If the error recurs, contact your
dealer.

Error Indicators

3