Toshiba 24S Series Посібник з монтажу - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з монтажу для Кондиціонер Toshiba 24S Series. Toshiba 24S Series 10 сторінок. Air conditioner (split type)

Test Operation

To switch the TEST RUN (COOL) mode, press RESET button for 10
seconds. (The beeper will make a short beep.)
Hi POWER FILTER
PAP
RESET button

Auto Restart Setting

This product is designed so that, after a power failure, it can restart
automatically in the same operating mode as before the power failure.
Information
The product was shipped with Auto Restart function in the off position.
Turn it on as required.
How to set the Auto Restart
1. Press and hold the RESET button on the indoor unit for 3 seconds to set
the operation. (3 beep sound and OPERATION lamp blink 5 time/sec for
5 seconds)
. Press and hold the RESET button on the indoor unit for 3 seconds to
cancel the operation. (3 beep sound but OPERATION lamp does not
blink)
In case of ON timer or OFF timer are set, AUTO RESTART
OPERATION does not activate.
TIMER OPERATION
RESET
8
Toshiba 1110651160 (EN)