Toshiba 24E2AVSG-A Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Кондиціонер Toshiba 24E2AVSG-A. Toshiba 24E2AVSG-A 12 сторінок.
Друкувати сторінку
9. Adding or editing the program.
The program can be set to perform on all the required
days until
10. If adding or editing a program is required, please
repeat steps 2 - 8 before setting confi rmation.
11. After adding or editing, press
setting*.
Weekly timer running
Next program
Timer ON or OFF
*Point remote control at air conditioner receiving
module then, press SET button until you hear the
"PiPi" sound. This means the setting operation has
been completed. As the air conditioner is receiving
the signal, you will hear separate "Pi" sounds
corresponding to the number of days in the selected
setting.
An incomplete setting is indicated if the TIMER lamp
is blinking. Press
Notes :
1. Place the remote control where the indoor unit can receive the signal.
This will increase the accuracy of the timing between the remote control
and the air conditioning unit.
2. The ON/OFF timer can be set during the WEEKLY TIMER operation. In
this situation, the air conditioner will fi rst follow the normal timer until it is
complete; then, it will return to the WEEKLY TIMER function.
3. During WEEKLY TIMER operation, all of operation such as MODE, TEMP,
FAN, Hi POWER, ECO and etc., can be adjusted but when the clock
reaches the program setting, the operation will return to the set items in
the program.
4. When the remote control is sending a signal to the air conditioner, avoid
interference from objects that can block the signal.
Edit Weekly timer program
To edit the program after confi rming the weekly timer
setting, follow steps 1 - 3 below.
1. Press
● The day of the week and the program number of
the current day will be displayed.
2. Press
press
confi rmed.
● Resetting the operation.
3. Press
Deactivating WEEKLY TIMER operation
Press
LCD.
● The "WEEKLY" indicator will disappear from the
LCD. However, the program will remain in the
remote control.
● The TIMER lamp goes off.
● To reactivate the WEEKLY TIMER operation again,
press
The program, after reactivation, is related to the
clock time.
is pressed to confi rm the setting.
to confi rm the
Operating Mode
Display after
pressing SET
button
Next operation
Operating Temperature
time
and Fan speed
twice.
.
to select the day of the week and
to select program number to be
to exit confi rming mode.
while "WEEKLY" is displayed on the
again, LCD shows the next program.
To delete programs
The individual program
1. Press
.
● The day of the week and the program number
is displayed.
● Select the day to delete the program.
2. Press
to select the program number to be
deleted.
3. Press
.
● ON or OFF timer will be cleared and the LCD
will blink.
4. Press
to delete the program.
● Press
while the LCD is blinking.
The program has now been deleted.
All programs
1. Press
.
● The day of the week and the program number
will be displayed.
2. Press
and hold for 3 seconds.
● All programs will be deleted and LCD displays
current operation.
Notes :
Make sure the remote control receiving module
on the air conditioner receives the signal from the
remote control.