ECKey EK6 series Посібник зі встановлення та експлуатації - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник зі встановлення та експлуатації для IP-контролери доступу ECKey EK6 series. ECKey EK6 series 15 сторінок. Internal/external mounting – red and green led control from access control system
Також для ECKey EK6 series: Посібник інсталятора (9 сторінок)

Друкувати сторінку

Configuring an EK6 Reader (cont'd)

Identification – Defines which User/Manager phones will trigger the ECKey reader. Options are:

All phones – All Bluetooth discoverable phones (even unpaired phones).

ii.

Previously paired phones – Only phones that have been paired with the reader.

iii.

Authenticated Phones - Previously paired phones that are re-authenticated each time they are in

range. This will take slightly longer to trigger the reader but is the most secure method as it will

ensure the phone has not been cloned. Phones that are using Authenticated Mode must keep the

Bluetooth link key stored on their phone – the link key is removed when the ECKey reader is

forgotten or removed from a phone's Bluetooth device list.

Trigger – Defines what will trigger the reader. Options are:

Range – Valid user will trigger the reader simply by making phone Bluetooth discoverable within

range of the reader. This is sometimes referred to as "hands free" because many phones can be

made discoverable indefinitely requiring no user interaction to trigger the reader.

ii.

PIN – Requires a PIN to be entered on the phone to trigger the reader. Phones defined as Users

must enter the User PIN, and phones that are defined as managers must enter the Manager PIN.

This is known as "keypad mode."

Pairing – Defines how you enroll/pair a phone with the reader. See Enrolling a User section.

Automatic – The reader attempts to pair with any discoverable phone in range.

ii.

Manual (default) – User must hold the administration button for 3 seconds to initiate pairing.

PIN Tab

PIN – PIN used for enrollment/triggering the reader on USER section, PIN used for enrollment/triggering/

administrative tasks on MANAGER section.

Mode – Defines the type of PIN. Options are:

Fixed – PIN is static and the same for all Users/Managers.

ii.

VIZpin – Used when configuring the reader for the VIZpin service. This will set the reader for

phone-specific and time-specific PINs required for VIZpin to work properly. NOTE: When

configuring the reader to be used with VIZpin, you must also set the One Level Trigger (or the

User Trigger when in User & Manager mode) to PIN. Also, you must be subscribed to the VIZpin

service and have added this reader to your VIZpin account prior to using VIZpin. See the VIZpin

Configuration Guide for details.

PIN Length – Defines the length of the fixed PIN. We recommend using 4-8 digits.

Force Pairing on PIN Change – When checked, this will require phones to re-pair each time the PIN has

changed. If not checked but the PIN has changed since the phone was last paired, the ECKey reader and

phone will remain paired.

ECKey Installation and Operation Guide