Toshiba 13A26 Посібник користувача - Сторінка 11
Переглянути онлайн або завантажити pdf Посібник користувача для ТЕЛЕБАЧЕННЯ Toshiba 13A26. Toshiba 13A26 29 сторінок. Toshiba tv 13a26, 19a26 owner's manual
Також для Toshiba 13A26: Посібник користувача (29 сторінок), Посібник користувача (15 сторінок), Посібник з експлуатації (43 сторінок), Посібник з експлуатації (33 сторінок)
Друкувати сторінку
USING THE LOCK MENU
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAMETIMER and CHANGE PASSWORD functions.
You can use these functions after entering the correct PASSWORD. (This password is the same one selected under "SETTING THE
V-CHIP" on page 10.)
LOCKING CHANNELS
With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the
setting. You can choose to lock up to nine TV channels and nine cable channels.
1
Use the Channel Number buttons (0–9) to display the
television channel you wish to lock.
2
Press MENU, then press SET + or – until the indicator
next to "LOCK" begins to flash. Then press ENTER.
Use the Channel Number buttons (0–9) to enter your
3
password, then press ENTER.
The LOCK menu appears.
Press SET + or – until the indicator next
4
to "CH LOCK" begins to flash, then
press ENTER.
Press SET + or – to select:
5
• INPUT to select the channel as one to
be locked. Then press ENTER.
• ALL CLEAR to clear all channels from
the list of locked channels. Then press
ENTER.
LOCKING VIDEO INPUT
With the VIDEO LOCK feature, you can lock out the input
source (VIDEO) and channels 3 and 4.
You will not be able to select the input sources with the TV/
VIDEO button or Channel buttons unless you clear the setting.
Press MENU, then press SET + or – until the indicator
1
next to "LOCK" begins to flash, then press ENTER.
Use the Channel Number buttons (0–9) to enter your
2
password, then press ENTER. The LOCK menu appears.
Press SET + or – until the indicator
3
next to "VIDEO LOCK" begins to flash,
then press ENTER.
4
Press SET + or – to select:
• OFF: Unlocks all video input sources.
• VIDEO: Locks VIDEO.
• VIDEO +: Locks VIDEO, channel 3 and channel 4.
This option should be used if you use the antenna
to play a video tape.
5
Press MENU repeatedly until the menu screen is cleared.
NOTE:
After programming VIDEO LOCK, change channels or activate
the TV/VIDEO key before turning off the television.
TO SET THE ON TIMER
This feature allows you to program the TV to turn on automatically at a set time and channel.
NOTE: After a power failure or disconnection of the power, the timer setting will be lost.
1
Press MENU, then press SET + or – until
the indicator next to "ON TIMER" begins
to flash. Then press ENTER.
The ON TIMER menu appears.
2
Press SET + or – to set the desired hour (0–12), then
press ENTER.
3
Press SET + or – to set the desired minute
(00, 05, 10, ...55), then press ENTER.
3X00121A(E)_P08-12
LOCK
CH LOCK
VIDEO LOCK
GAME TIMER
CHANGE PASSWORD
〈 + / – / ENTER / MENU 〉
CH LOCK
CABLE
INPUT
--- --- ---
--- --- ---
--- --- ---
ALL CLEAR
〈 + / – / ENTER / MENU 〉
VIDEO LOCK
OFF
VIDEO
VIDEO+
〈 + / – / ENTER / MENU 〉
ON TIMER
HOUR
00h
MINUTE
00m
CH 002
CANCEL
〈 + / — / ENTER / MENU 〉
11
6
Repeat steps 1 through 5 to lock other channels. When you
are finished locking channels, press MENU repeatedly until
the menu screen is cleared.
If you try to tune a locked channel, the TV will not display it, but
will display the nearest unlocked channel.
NOTES:
• If you are accessing the LOCK menus or V-chip menus for the
first time, choose a four-digit number to be your password.
• After programming CH LOCK, change channels before turning
off the television.
• If you want to unlock channels, select ALL CLEAR in step 5,
then press ENTER.
SETTING THE GameTimer
With the GameTimer
TM
feature, you can automatically activate
the VIDEO LOCK feature (VIDEO setting) to set a time limit for
playing a TV game (30, 60, 90, or 120 minutes).
1
Press MENU, then press SET + or – until the indicator next to
"LOCK" begins to flash, then press ENTER.
Use the Channel Number buttons (0–9) to enter your pass-
2
word, then press ENTER. The LOCK menu appears.
3
Press SET + or – until the indicator next to
"GAMETIMER" begins to flash, then press
ENTER.
Press SET + or – to select a time limit
4
(30 minutes, 60 minutes, 90 minutes, 120
minutes or OFF).
5
Press MENU repeatedly until the menu screen is cleared.
After the GAMETIMER is programmed, the display will
appear briefly every ten minutes to remind you that the
GAMETIMER is operating. When the programmed end
time is reached, the display will change the channel
automatically.
4
Press SET + or – to set the desired
channel, then press ENTER.
5
Press SET + or – to select the SET mode, then press
ENTER.
6
Press MENU repeatedly until the menu screen is cleared.
NOTE:
To cancel the ON TIMER, select CANCEL in step 4 above. Press
MENU repeatedly until the menu screen is cleared.
22/12/05, 4:15 PM
TM
GAME TIMER
OFF
30
60
90
120
+ / Ð / ENTER / MENU
〈
〉
ON TIMER
HOUR
08h
MINUTE
15m
CH 125
SET
〈 + / — / ENTER / MENU 〉
11