Toshiba 19A26 Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для ТЕЛЕБАЧЕННЯ Toshiba 19A26. Toshiba 19A26 15 сторінок. Toshiba 19a26 color television service manual
Також для Toshiba 19A26: Посібник користувача (29 сторінок), Технічні характеристики (2 сторінок), Посібник користувача (29 сторінок), Посібник з експлуатації (34 сторінок)

Друкувати сторінку
Toshiba 19A26 Посібник користувача
÷
÷
USING THE LOCK MENU
The LOCK menu includes the CH LOCK, VIDEO LOCK, GAMETIMER
and CHANGE PASSWORD functions.
You can use these functions after entering the correct PASSWORD. (This password is the same one selected under "SETTING THE
V-CHIP" on page 10.)
LOCKING
CHANNELS
With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the
setting. You can choose to lock up to nine TV channels and nine cable channels.
rb3
Repeat steps 1 through 5 to lock other channels. When you
]
Use the Channel Number buttons (0-9) to display the
iol
television channel you wish to lock.
are finished locking channels, press MENU repeatedly until
the menu screen is cleared.
Press MENU, then press SET + or-
until the indicator
next to "LOCK" begins to flash. Then press ENTER.
[]
[]
[]
[]
Use the Channel Number buttons (0-9) to enter your
password, then press ENTER.
The LOCK menu appears.
I'-'_'WDEOm
,LOCKcH
LOCKLocK 1
Press SET + or - until the indicator next
mGAMETIMER
to "CH LOCK" begins to flash, then
= C,ANGEP_SSWC_D
press ENTER.
(+/-/ENT£R/MENU)
Press SET + or - to select:
f" CH LOCK
" INPUT to select the channel as one to |, _BLE
J
be locked. Then press ENTER.
I-,,m_puT::: ::: :::
• ALL CLEAR to clear all channels from
L mALLCL_R
......
the list of locked channels. Then press
ENTER.
e/ /ENTER/MENU)
If you try to tune a locked channel, the TV will not display it, but
will display the nearest unlocked channel.
NOTES:
• If you are accessing the LOCK menus or V-chip menus for the
first time, choose a four-digit number to be your password.
• After programming
CH LOCK, change channels before turning
off the television.
• If you want to unlock channels, select ALL CLEAR in step 5,
then press ENTER.
LOCKING
WDEO
INPUT
With the VIDEO LOCK feature, you can lock out the input
source
VIDEO) and channels 3 and 4.
Youw
notbeabetoseectthe
nputsourceswththeTV/
VIDEO button or Channel buttons unless you clear the setting.
]
Press MENU, then press SET + or-
until the indicator
next to "LOCK" begins to flash, then press ENTER.
]
Use the Channel Number buttons (0-9) to enter your
password, then press ENTER. The LOCK menu appears.
SETTING
THE GameTirner
TM
With the GameTimer
TM
feature, you can automatically activate
the VIDEO LOCK feature (VIDEO setting) to set a time limit for
playing a TV game (30, 60, 90, or 120 minutes).
r_
Press MENU, then press SET + or - until the indicator next to
"LOCK" begins to flash, then press ENTER.
]
Use the Channel Number buttons (0-9) to enter your pass-
word, then press ENTER. The LOCK menu appears.
]
Press SET + or-
until the indicator
[ WDEOLOOK
}
[]
next to "VIDEO LOCK" begins to flash,
_.OFF
then press ENTER.
w_o
VIDEO+
Press SET + or - to select:
I==DI • OFF: Unlocks all video input sources.
(+/-/ENTER/MENU}
" VIDEO: Locks VIDEO.
• VIDEO +: Locks VIDEO, channel 3 and channel 4.
This option should be used if you use the antenna
to play a video tape.
]
Press MENU repeatedly until the menu screen is cleared.
NOTE:
After programming
VIDEO LOCK, change channels or activate
the TV/VlDEO
key before turning off the television.
Press SET + or - until the indicator next to ( GAME T IMER
"GAMETIMER" begins to flash, then
press
[
• OFF
J
ENTER.
30
60
90
Press SET + or - to select a time limit
_20
(30 minutes, 60 rninutes, 90 minutes, 120
(,/-/E11TER/MENU)
minutes or OFF).
Press MENU repeatedly until the menu screen is cleared.
After the GAMETIMER
is programmed,
the display will
appear briefly every ten minutes to remind you that the
GAMETIMER
is operating.
When the programmed end
time is reached, the display will change the channel
automatically.
TO SET THE ON TIMER
This feature allows you to program the TV to turn on automatically
at a set time and channel.
NOTE: After a power failure or disconnection
of the power, the timer setting will be lost.
]
PressMENU,
then pressSET+or-
until [
the indicator next to "ON TIMER" begins
to flash. Then press ENTER.
The ON TIMER menu appears.
ON TIMER
l
HOUR
_0$h /
MINUTE
/ 0r_m"
OH 002
CANCEL
(+/--tENTER/MENU)
]
+ or - to set
Press SET
the desired
channel, then press ENTER.
]
Press SET
to set the desired hour
then
÷
or
(0-1
2),
press ENTER.
]
Press SET
to set the desired minute
+
or
(00, 05, 10, ...55), then press ENTER.
I
0N TILIER
1
HOUR
08h
MINUTE
\15ff/
@4125
}SET
c
(+_
_ ENTER _MENUI
]
Press SET + or-
to select the SET mode, then press
ENTER.
[_
Press MENU repeatedly until the
is cleared.
menu screen
NOTE:
To cancel the ON TIMER, select CANCEL in step 4 above. Press
MENU repeatedly until the menu screen is cleared.
11
÷
3X00121A(E)
P08-12
11
_
22/12/05,
4:15 PM