Epson PowerLite Pro G5450WU Посібник з експлуатації - Сторінка 38

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Програмне забезпечення Epson PowerLite Pro G5450WU. Epson PowerLite Pro G5450WU 47 сторінок. Esc/vp21 command for business projectors
Також для Epson PowerLite Pro G5450WU: Посібник з експлуатації (20 сторінок), Декларація про відповідність (4 сторінок), Коротка довідкова картка (7 сторінок), Посібник користувача (25 сторінок)

Error Message List

Error Messages

Cannot start from the shortcut while the Option screen is

displayed. Close the Option screen, and then try opening

the shortcut again.

The slide show may will not begin until PowerPoint is

restarted.

Error Messages when Searching for and Selecting Projectors

Error Messages

Cannot join. The maximum number of participants has

been exceeded.

The keyword does not match. Re-enter the keyword

displayed on the projector screen.

Connection failed due to keyword mismatch.

Updating display configuration. Please try again in a few

minutes. Select another projector.

One or more projectors are not responding.

A network error occurred.

Connection to the projector failed.

The Option screen is displayed. Close the Option screen.

Close PowerPoint, and then start again.

Sixteen computers are already connected to the projector. Disconnect users and projectors that are

not projecting screens.

s "Ending the Meeting"

p.25

Check the Projector Keyword displayed on the LAN standby screen, and enter the Projector Keyword.

If a user is already connected, check the Projector Keyword with the connected user.

Reconnect to the projector. Enter the Projector Keyword on the keyword entry screen displayed when

you connect.

Check the Projector Keyword that is displayed on the projector's LAN standby screen. If a user is

already connected, check the Projector Keyword with the connected user.

When another user is already connected, you can only connect to the projectors in the combination

selected by the other user. Select a projector from the same combination as the user who is already

connected, or select a projector that is in standby status.

You cannot connect to multiple projectors simultaneously. Check the network settings on the

computer and the network settings on the projector.

Try connecting again. If it still does not connect, check the network settings on the computer and the

network settings for the projector.

Cannot connect to a projector that is already connected using EasyMP Network Projection. Check if

the projector you want to connect to is already connected to EasyMP Network Projection.

Remedy