MSI 610BF Посібник - Сторінка 45

Переглянути онлайн або завантажити pdf Посібник для Материнська плата MSI 610BF. MSI 610BF 45 сторінок.

or "Hot-key" "PS/2 Mouse" in "Power On Function" item under "INTEGRATED PERIPHERAL SETUP".

A: When choose "Password", then user can setting your password in "KB Power On Password" item. After save

CMOS SETUP, the next time want to power on, you have to key in your password to power on, otherwise the

system will not power on.

B: When choose "Hot-key"or "PS/2 Mouse" , then user can choose by key in Hot-key or Push Mouse button, or

use Power button to power on system.

Question and Answer:

Q1:

When you forget password or the system can not power on by power button?

Answer: There has two solution of this problem:

sol 1:

1st :

Turn off the Power Supply by ON/OFF switch.

2nd:

Clear CMOS by JP4 1-2 closed about 10 sec and remove the Jumper to 2-3

closed for Normal use.

3rd:

Switch ON the Power Supply by ON/OFF switch.

4th:

Follow Function 1 or Function 2 to setting to setting your Power On Function.

sol 2:

Change the Jumper setting both JP4 2-3 closed . Let you can use power button to Power On your system,

and you can setting BIOS again. In this condition you can choose use Function 1 (use Power Button

Power On) or use Function 2 (Use Keyboard Password/ Hot-key Power On) to setting your system.

Q2:

When use Function 2 use keyboard Password/Hot-key Power On, there has keyboard error problem?

Answer: This is the Power Supply 5V stand by current too small can not drive the keyboard.

sol:

If your Power Supply 5V Stand By current is not enough to driver keyboard. You can not use keyboard

password/Hot-key power on Function, Please change the Jumper setting JP6 2-3 closed only can use

Function 1: Power Button Power On.

Figure A