MSI 612BF Посібник користувача - Сторінка 26

Переглянути онлайн або завантажити pdf Посібник користувача для Материнська плата MSI 612BF. MSI 612BF 48 сторінок. 3d-agp vga / 3d-audio m/b for socket 370
Також для MSI 612BF: Посібник (45 сторінок)

Друкувати сторінку



RAS# Precharge Timing (for 612BF): This item controls RAS# precharge (in local

memory clocks) , this function is same " SDRAM RAS Precharge Time ".

The choice: Fast, Slow.

3-4

Integrated Peripherals

OnChip Primary PCI IDE

OnChip Secondary PCI IDE

IDE Primary Master PIO

IDE Primary Slave PIO

IDE Secondary Master PIO

IDE Secondary Slave PIO

IDE Primary Master UDMA

IDE Primary Slave UDMA

IDE Secondary Master UDMA

IDE Secondary Slave UDMA

USB Controller

USB Keyboard Support

Init Display First

AC97 Audio

AC97 Modem

IDE HDD Block Mode

Power on Funtion

Onboard FDC Controller

Onboard Serial Port 1

Onboard Serial Port 2

 Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help

F5:Previous Values



OnChip Primary/Secondary PCI IDE: The integrated peripheral controller contains an IDE

interface with support for two IDE channels. Select Enabled to activate each channel

separately.

The choice: Enabled, Disabled.



IDE Primary/Secondary Master/Slave PIO: The four IDE PIO (Programmed Input/Output)

fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE

interface supports. Modes 0 through 4 provide successively increased performance. In

Auto mode, the system automatically determines the best mode for each device.

The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.



IDE Primary/Secondary Master/Slave UDMA: Ultra DMA/33 implementation is possible

only if your IDE hard drive supports it and the operating environment includes a DMA driver

(Windows 95 OSR2 or a third-party IDE bus master driver). If your hard drive and your

system software both support Ultra DMA/33, select Auto to enable BIOS support.

The Choice: Auto, Disabled.



USB Controller: Select Enabled if your system contains a Universal Serial Bus (USB)

controller and you have USB peripherals.

The choice: Enabled, Disabled.

USB Keyboard Support: Select Enabled if your system contains a Universal Serial Bus



(USB) controller and you have a USB keyboard.

Integrated Peripherals

Enabled

Auto

Enabled

Disabled

PCI Slot

Enabled

BUTTON ONLY

Enabled

3F8/IRQ4

2F8/IRQ3

F6:Optimal defaults

Item Help

______________________

Menu Level

If your IDE hard drive

supports block mode

select Enabled for

automatic detection of

the optimal number of

block read/write per

sector the drive can

support

F7:Standard Defaults

