Epson Stylus Pro - Stylus Color Pro Ink Jet Printer Посібник з монтажу та експлуатації - Сторінка 33
Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Програмне забезпечення Epson Stylus Pro - Stylus Color Pro Ink Jet Printer. Epson Stylus Pro - Stylus Color Pro Ink Jet Printer 44 сторінки. Macintosh & macintosh power pc version 3.1 for stylus color/pro/pro xl
Також для Epson Stylus Pro - Stylus Color Pro Ink Jet Printer: Технічна специфікація (1 сторінок), Технічна специфікація (15 сторінок)
Друкувати сторінку
PowerRIP Manual
Paste
Clear
Printer Menu
Except where noted, these commands operate on the selected printer in the Printer
List.
Hold
Printer
Release
Printer
Hold All Printers
Release
AlI Printers
Printer
Close
Setup Printer
Show Completed Jobs
28
This command copies any text on the Clipboard to the
currently selected text view. If any text is selected, it is
replaced at the insertion point.
This command deletes any selected text. If no text is
selected, any character before the insertion point is deleted.
This command prevents any jobs for the selected printer
from being printed. The printer hold status is indicated by
an H to the left of the printer name. The jobs for this
printer are marked with an h to their left. However, the
currently printing job cannot be held; rather, you must
pause or cancel it to stop printing immediately.
If dimmed, the selected printer is already held.
Any jobs in the Pre-Print Queue for other printers are still
printed in order.
This command releases a previously held printer. If
dimmed, the selected printer is not held.
This command holds all open printers. The selected
printer is ignored.
This command releases any previously held printers. The
selected printer is ignored.
This command closes the selected printer. Once closed,
the printer can no longer be used by a PowerRIP client.
This command displays the Printer Setup Dialog for this
printer. For a detailed description of the Printer Setup
Dialog, see the appendix.
Note that changes to printer parameters do not take effect
until completion of all ready jobs for that printer.
This command opens the PowerRIP Completed Jobs
Window. If this window is already open, it is made the
front-most window.
Birmy Graphics Corporation