Toshiba e-Studio 1057 Посібник із швидкого старту - Сторінка 28
Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Принтер "Все в одному Toshiba e-Studio 1057. Toshiba e-Studio 1057 37 сторінок. Digital multifunctional system
Друкувати сторінку
SUPPLIES
Standard supplies for this product that can be replaced by the user include paper,
toner cartridges, and staple cartridges for the finisher.
Be sure to use only TOSHIBA-specified products for the toner cartridges, finisher
staple cartridge, and transparency film.
Storage of supplies
Proper storage
1. Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper may curl or become
damp, resulting in paper misfeeds.
Supply of spare parts and consumables
The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the machine which
may break down within the scope of the ordinary use of the product, whereas those parts which normally exceed the life of the product are not to be considered as spare parts.
Consumables too, are available for 7 years following the termination of production.
GENUINE SUPPLIES
For best copying results, be sure to use only TOSHIBA Genuine Supplies which are
designed, engineered, and tested to maximize the life and performance of TOSHIBA
products. Look for the Genuine Supplies label on the toner package.
Storing toner cartridges
Store a new toner cartridge box horizontally with the top side up. Do not store a toner
cartridge standing on end. If stored standing on end, the toner may not distribute
well even after shaking the cartridge vigorously, and will remain inside the cartridge
without flowing out.
Staple cartridge
The finisher and saddle finisher require the following staple cartridge:
MX-SCX3 (for saddle stitch of saddle stitch finisher)
Approx. 2000 per cartridge 4 cartridges
MX-SCX2 (for finisher (large stacker) and saddle stitch finisher (large stacker))
Approx. 5000 per cartridge 3 cartridges
MX-SCX1 (for saddle stitch of saddle stitch finisher (large stacker))
Approx. 5000 per cartridge x 3 cartridges
AR-SC2 (for finisher and saddle stitch finisher)
Approx. 5000 per cartridge x 3 cartridges
28