MSI MS-1022 Посібник з монтажу - Сторінка 3

Переглянути онлайн або завантажити pdf Посібник з монтажу для Ноутбук MSI MS-1022. MSI MS-1022 7 сторінок. 17'' wsxga notebook

Step 1 : Installing CPU

1-1 Prepare a proper size flat head screw driver. Un-screw the screw until it can not

go any further

1-2 Locate the golden cut edge on the CPU's upper right-hand corner. Then insert the

CPU into the socket.

!! The CPU will only fit in the coorect orientation !!

1-3 Adjust the CPU socket by turning the screw. Make sure the CPU is properly

installed. Then press the CPU evenly by hand and turn the screw using a flat head

screw driver to lock the CPU in place.

location is aligned with the notch of the CPU socket. If the CPU does not align with

the CPU socket, it will damage the CPU !!

Step 2 : Installing CPU Heat Sink and Fan

2-1 Use the Heat Sink and Fan that is provided

!! Please make sure the golden cut edge

2-2 Slide the CPU Heat Sink and Fan assembly over the CPU

no wires underneath the Heat Sink !!

2-3 a.b.c.d. Align the four screws with the screw holes next to the CPU. May need to

slide the Heat Sink to the side to align. Tighten the four screws in a diagonal

direction.

!! Improper connection of the CPU heat sink will damage the notebook

and CPU !!

2-4 Plug the CPU fan connector before positioning the fan.

correctly. There is only one way to connect. DO NOT force in !! Warning: failure to

connect the fan may cause damage to the notebook and CPU !!

p. 3

p. 4

!! Be sure that there are

!! Connect the wires