Philips X Series Посібник користувача - Сторінка 33
Переглянути онлайн або завантажити pdf Посібник користувача для Монітор Philips X Series. Philips X Series 50 сторінок. Video wall display
Також для Philips X Series: Інструкція з розпакування та встановлення (8 сторінок), Посібник користувача (49 сторінок)
Друкувати сторінку
6.2.5. Configuration 1 menu
Picture
Switch on state
Screen
Panel saving
Audio
RS232 routing
PIP
Boot on source
Configuration 1
WOL
Configuration 2
Light sensor
Advanced Option
Human sensor
NetworkSettings
Power LED Light
Configuration1 reset
Picture
Factory reset
Screen
Audio
PIP
Configuration 1
Configuration 2
Advanced Option
Switch on state
Select the display status used for the next time you connect
the power cord.
•
{Power off} - The display will remain off when the power
cord is connected to a wall outlet.
•
{Forced on} - The display will turn on when the power
cord is connected to a wall outlet.
•
{Last status} - The display will return to the previous
power status (on/off/standby) when removing and
replacing the power cord.
Panel saving
Choose to enable the panel saving functions and thus reduce
the risk of "image persistence" or "ghost-imaging".
•
{Brightness} - Select {On} and the image brightness will be
reduced to an appropriate level. The Brightness setting in
the Picture menu will be unavailable when selected.
•
{Pixel shift} - Select the time interval ({Auto} / {10 ~
900} Seconds / {Off}) for the display to slightly expand
the image size and shift the position of pixels in four
directions (up, down, left, or right).
•
{Cooling fan} - Select for fan speed {Off}(Default)/{Auto}/
{Low}/{Medium}/{High}.
RS232 routing
Select the network control port.
Choose from: {RS232/LAN}/ {OPS RS232/LAN}.
Last status
Action
RS232/LAN
Action
Off
Off
Off
Action
On
Action
Action
31
Boot on source
Choose to select source when boot up.
Input: select input source when bootup.
WOL
Choose to turn on or off the wake on LAN function.
Choose from : {Off} / { On}
Light sensor (require Philips accessory CRD41 External
Sensor Box)
Choose to turn on or off backlight adjustment according to
environment brightness.
Choose from : {Off} / { On}
Human sensor (require Philips accessory CRD41 External
Sensor Box)
The Human sensor can detect if people approach the display
or not.
The display will turn off backlight if it detects nothing in
setting time.
The display will return to backlight on when people
approach the display.
The options are:
•
{Off} (Default), {10 Min.}, {20 Min.}, {30 Min.}, {40 Min.}, {50
Min.}, {60 Min.}
NetworkSettings
•
DHCP On -> Cannot modify IP address/Subnet mask/
Default gateway
•
DHCP Off-> Can manualy input IP address/Subnet mask/
Default gateway.
Power LED Light
Choose to set power indication LED on or off.
Choose {On} for normal use.
Configuration 1 reset
Reset all settings in Configuration 1 menu to the factory
preset values.
Factory reset
Reset all settings in the OSD menus of {Picture}, {Screen},
{Audio}, {PIP}, {Configuration 1}, {Configuration 2}, and
{Advanced option} to the factory preset values.
Press [ ] or [ ] button to select {Reset}, and press [OK]
button to do the reset.
Factory reset
ENERGY STAR
Cancel
55BDL3207X
®
Reset