Philips AX2300 Швидкий старт - Сторінка 3

Переглянути онлайн або завантажити pdf Швидкий старт для Стереосистема Philips AX2300. Philips AX2300 4 сторінки. Mini syst.
Також для Philips AX2300: Інструкція з використання Посібник з використання (14 сторінок), Технічні характеристики (2 сторінок), Технічні характеристики (2 сторінок), Посібник з експлуатації (22 сторінок)

Друкувати сторінку

GENERAL INFORMATION / CD PLAY

In-car use (connections supplied or optionally available)

Only use the AY 3545 (4822 219 10033) or AY 3548 (3140 118 71890) car voltage

converter (4.5 V DC, positive pole to the centre pin) and the AY 3501 car adapter

cassette. Any other product may damage the set.

Put the set on a horizontal, vibration-free and

stable surface. Make sure it is in a safe place,

where the set is neither a danger nor an

obstacle to the driver and the passengers.

Plug the voltage converter into the

cigarette lighter socket (only for 12 V car

battery, negative grounding), then connect

the wired end with 4.5V DC input socket on the

set.

If necessary, clean the cigarette lighter socket

to obtain a good electrical contact.

Turn down the volume and connect the cassette adapter plug to LINE OUT/p

on the set.

Carefully insert the cassette adapter into the car radio's cassette compartment.

Make sure the cord does not hinder your driving.

Decease the volume on the set, if necessary. Start playback on the set and

adjust the sound with the car radio controls.

• Always remove the voltage converter from the cigarette lighter socket

when the set is not in use.

Note: If your car radio has a LINE IN socket , it is better to use it for the

car radio connection instead of the cassette adapter. Connect the signal

lead to this LINE IN socket and to LINE OUT/p on the set.

Playing a CD

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to

play a CD-ROM, CDi, VCD, DVD or computer CD.

1 Push the OPEN 2 slider to open the player.

2 Insert an audio CD, printed side up, by pressing the

CD onto the hub.

3 Close the player by pressing the lid down.

4 Press 2; to switch the player on and start playback.

yThe current track number and elapsed playing

time are displayed.

• You can pause playback by pressing 2;.

yThe time at which playback was paused starts

flashing.

• You can continue playback by pressing 2; again.

5 Press 9 to stop playback.

yThe total number of tracks and the total playing

time of the CD are displayed.

6 Press 9 again to switch the player off.

• To remove the CD, hold it by its edge and press the

hub gently while lifting the CD.

Note: If there is no activity, the set will automatically

switch off after a while to save energy.

Playback information

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded

properly, nF dISC is displayed, indicating that the CD has not been

finalized. In that case, use FINALIZE on your CD recorder to complete the

recording.

• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15

seconds after pressing 2; for sound reproduction to start.

12 V DC

• Playback will stop if you open the CD lid.

• While the CD is read, 01 --:-- flashes in the display.

4,5 V DC

Volume and bass

Volume adjustment

• Adjust the volume by using VOL E.

Bass adjustment

• Press DBB to switch the bass enhancement on or

off

yDBB appears if the bass enhancement is

activated.

Selecting a track and searching

Selecting a track during playback

• Briefly press ∞ or § once or several times to skip to the current, previous or

next track.

yPlayback continues with the selected track, and

the track's number is displayed.

Selecting a track when playback is stopped

1 Briefly press ∞ or § once or several times to select

the desired track. The track number is displayed.

2 Press 2; to start CD play.

yPlayback starts with the selected track.

Searching for a passage during playback

1 Keep ∞ or § pressed to find a particular passage in

a backward or forward direction.

ySearching starts while playback continues at low

E S P

volume. After 2 seconds the search speeds up.

2 Release the button when you reach the desired passage.

yPlayback continues from this position.

E S P

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not

possible.

– In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or

while playing a program, searching is only possible within the

particular track.

CD PLAY / FEATURES

D B B