Philips AZ1046 Посібник користувача - Сторінка 7
Переглянути онлайн або завантажити pdf Посібник користувача для Стереосистема Philips AZ1046. Philips AZ1046 21 сторінка. Cd soundmachine
Також для Philips AZ1046: Посібник користувача (15 сторінок), Технічні характеристики (2 сторінок)
Друкувати сторінку
As these colours may not correspond with the
colour markings identifying the terminals in your
plug, proceed as follows:
•
Connect the blue wire to the terminal
marked N or coloured black.
•
Connect the brown wire to the terminal
marked L or coloured red.
•
Do not connect either wire to the earth
terminal in the plug, marked E (or e) or
coloured green (or green and yellow).
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath
of the lead - not simply over the two wires.
Mains plug
This apparatus is fitted with an approved 13 Amp
plug. To change a fuse in this type of plug proceed
as follows:
a Remove fuse cover and fuse.
b Fix new fuse which should be a BS13625
Amp, A.S.T.A. or BSI approved type.
c Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should have
a value of 5 Amp. If a plug without a fuse is used,
the fuse at the distribution board should not be
greater than 5 Amp.
The severed plug must be disposed off to avoid a
possible shock hazard should it be inserted into a
13 Amp socket elsewhere.