Philips DCM2068 Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Стереосистема Philips DCM2068. Philips DCM2068 18 сторінок. Micro system
Також для Philips DCM2068: Посібник користувача (18 сторінок), Короткий посібник користувача (2 сторінок)
Store FM radio stations
automatically
When you connect AC power and no FM
stations are stored, the system prompts you to
search and store all the available FM stations.
1
Connect the system to the power supply.
» [AUTO INSTALL - PRESS PLAY, STOP
CANCEL] (to auto install, press
to cancel, press
2
Press
to start full scan.
» The system automatically stores FM
radio stations with sufficient signal
strength.
» The first preset station is broadcast
automatically.
Tip
•
To exit storing mode, press
Set clock
1
In standby mode, press and hold CLOCK
on the remote control for two seconds.
» [SET CLOCK] (set clock) scrolls on
the display.
2
Press CLOCK again.
» The 12 or 24 hour format blinks.
3
Press
/
repeatedly to select an hour
format.
4
Press CLOCK to confirm.
» The hour digits blink.
5
Repeat steps 3-4 to set the hour and
minute.
Note
•
If the system is idle for 90 seconds, it exits clock setting
mode automatically.
;
) is displayed.
or
.
Turn on
Press .
» The system switches to the last selected
source.
Tip
•
To select another source, press SOURCE repeatedly or
the source selection buttons on the remote control.
Switch to standby mode
Press
to switch the system to standby mode.
» The clock (if set) appears on the display
panel.
EN
8