Toshiba SD5010KE Посібник користувача - Сторінка 11

Переглянути онлайн або завантажити pdf Посібник користувача для DVD-плеєр Toshiba SD5010KE. Toshiba SD5010KE 28 сторінок. Toshib dvd player

Друкувати сторінку

Names and functions

1. OPEN/CLOSE button

• Press the button to open/close the disc tray.

• The function is the same as the OPEN/CLOSE button on

the front panel.

2. ON/STANDBY button

Turn the unit on or set the unit to standby mode.

3. Number buttons

Press number buttons to play relevant chapter/track.

4. E.A.M button (Enhanced Audio Mode)

Use to select the sound enhancement on or off.

3D*:

To obtain expansive virtual surround sound effects from

two speakers. To use this enhancement on sounds output

from the ANALOG AUDIO OUT jacks, be sure to set

"Digital out" to "PCM".

* Effective in playback of a DVD .

Notes

• Actual effects to sounds may vary depending on the speaker

system. Make selection according to your preference.

• Actual effects to sounds may vary depending on the disc.

• When the DVD player is connected to an amplifier

equipped with Dolby Surround Pro Logic, select "3D

effect". Otherwise, Dolby Surround Pro Logic may function

differently than usual.

• The sound effect might not be heard easily on small TVs.

• The sound effect can be heard more easily at higher

volume.

• The sound effect might take a few seconds to be heard

after turning on the E.A.M.

5. E.P.M button (Enhanced Picture Mode)

Use to select the picture enhancement.

Brightness

Contrast

Select the picture enhancement by pressing / , then press

to make your selections.

To exit the picture enhancement selection, press E.P.M

again.

Note

Actual effect to picture may vary depending on the TV. Make

selection according to your preference.

6. ANGLE button

• While playing a scene recorded with multiple angles, press

the ANGLE button.

Number changes to show the number of the current angle.

(The maximum number of possible angles is 9)

ANGLE button is also used to rotate the picture in

clockwise direction during JPEG playback.

Note

This function can only be used for discs on which scenes

shot from multiple angles have been recorded. If only one

angle is recorded, "

" will be displayed.

7. PAUSE/STEP button

• Press PAUSE/STEP to freeze playback.

• During still playback, press PAUSE/STEP advance the

picture frame by frame.

[

1/3

8. SKIP buttons

To locate succeeding chapters or tracks.

To locate preceding chapters or tracks.

9. REV/FWD buttons

REV: Fast reverse playback

FWD: Fast forward playback

Each time you press the REV or FWD button, the playback

speed changes.

10. Direction buttons

Use

to select a selection in setup menu.

11. TOP MENU button

Display the title menu on DVD.

12. PLAY MODE button

While playing a disc, press the PLAY MODE button

repeatedly to select a repeat mode.

For DVD:

- Repeat Chapter (currently playing chapter)

- Repeat Title (currently playing title)

- Repeat All (entire disc)

- Off (cancel)

For Video CD, Audio CD:

- Repeat Single (currently playing track)

- Repeat All (entire disc)

- Off (cancel)

For MP3, JPEG, DivX

- Repeat Single (currently playing ﬁ le)

- Repeat Folder (current folder)

- Repeat All (all ﬁ les)

- Off (cancel)

Note

For VCD with PBC on, you cannot select a repeat

mode.

13. CLEAR button

Use CLEAR to delete the scheduled program or to cancel

input data in setting mode.

14. MEMORY button

• Press this button, the program screen is displayed as

below:

e.g. DVD

Clear

Chapter number

Title number

• Select the items in the order you want by pressing the

number buttons.

Each time you press the

is highlighted in turn. Highlight where you want to enter,

then press the corresponding number buttons.

e.g. VCD/Audio CD

[- -]

Track number

button, the space

[- -]

Clear