Toshiba SDV398KC Посібник користувача - Сторінка 16
Переглянути онлайн або завантажити pdf Посібник користувача для DVD-плеєр Toshiba SDV398KC. Toshiba SDV398KC 36 сторінок. Dvd video player / video cassette recorder
Також для Toshiba SDV398KC: Посібник користувача (36 сторінок)
Друкувати сторінку
Auto Repeat
The unit will automatically rewind the cassette tape when it has reached the end and will automatically start playback unless you press
[STOP C] or you turn off the unit.
VCR
VCR
1
Press [SETUP], and choose "AUTO REPEAT".
Note:
• The auto repeat function can also be set "ON" or "OFF" by pressing [REPEAT] on the remote control.
• To cancel auto repeat function, follow step 1 above. Then, press [B] so that "OFF" appears beside "AUTO REPEAT". Press [SETUP] to exit.
• The auto repeat playback will start automatically if you select "AUTO REPEAT" to "ON" in the stop mode.
Recording
Recording & One-touch Timer Recording (OTR)
VCR
VCR
1
Insert a recordable
cassette tape.
3
Press [SPEED] to select the desired tape speed.
Tape speed
Type of tape
SP mode
SP
SLP mode
Press [REC/OTR] until desired recording time is selected.
4
REC
(normal recording)
REC
5
Press [STOP C] to
stop recording.
Timer Recording
VCR
VCR
• Insert a recordable cassette tape.
1
Press [SETUP]. Select "TIMER PROGRAMMING".
EN
E8EB6CD_SD-V398KC_EN_v1.indd 16
E8EB6CD_SD-V398KC_EN_v1.indd 16
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
or
TV STEREO
[ON]
SAP
2
Select the channel to record.
or
Recording / playback time
T60
T120
T160
1hour
2hours
2-2/3hours
3hours
6hours
8hours
OTR (0:30)
OTR (1:00).....
OTR (8:00)
OTR (7:30)
6
Press [OPEN/CLOSE A] to eject the
recorded cassette tape.
OPEN/CLOSE
- M E N U -
TIMER PROGRAMMING
B TIMER PROGRAMMING
PROG
12345678
AUTO REPEAT
[OFF]
DATE
CHANNEL SET UP
START
TIME
CLOCK SET
END
TIME
LANGUAGE SELECT
AUDIO OUT
CHANNEL
TV STEREO
[ON]
REC SPEED
SAP
Available program number flashes.
2
Press [B] to "AUTO REPEAT" to set "ON" or "OFF".
[OFF]
Press [SETUP] to exit.
1
5
6
To stop recording temporarily (pause mode)
Press [PAUSE F].
• During the recording in pause mode, 5 C marks appear on the
TV screen. Each C mark represents 1 minute.
• Press it again to resume recording.
• Pause mode will be automatically canceled after 5 minutes to
prevent damage to the cassette tape and the video head.
Accidental Erasure Prevention
To prevent accidental recording, remove erase-protection tab
of the cassette tape. To record on it later, cover the hole with
adhesive tape.
2
Select an empty program number.
Then press [B] to go to next step.
or
– 16 –
- M E N U -
TIMER PROGRAMMING
B AUTO REPEAT
CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO
SAP
6
3
2
5
4
4
erase-protection tab
PROGRAM NUMBER 1
DATE
– – / – –
START
TIME – – : – –
END
TIME – – : – –
CHANNEL
– –
REC
SPEED – –
2009/01/29 17:05:20
2009/01/29 17:05:20
[ON]
[ON]
– –
– –