Philips EMOTIVE Micro MZ-1000 Посібник користувача - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник користувача для Стереосистема Philips EMOTIVE Micro MZ-1000. Philips EMOTIVE Micro MZ-1000 24 сторінки. Philips mz-1000/37 stereo systems: specifications
Також для Philips EMOTIVE Micro MZ-1000: Посібник користувача (25 сторінок), Посібник користувача (25 сторінок), Технічні характеристики (2 сторінок)
Друкувати сторінку
Presetting radio stations
You can preset up to 40 radio stations in the
memory.
IMPORTANT!
When "P" appears on the display, it only
enables preset number selection.
Press É Å to toggle between frequency
tuning and preset number selection.
ö Automatic preset programming
It enables you to program all available radio
stations automatically from a selected preset
number, starting from FM and followed by AM
band.
If no preset number is shown, automatic preset
will begin from preset (1) and all your former
presets will be overridden.
Note:
– If a radio station has been stored in one of the
presets, it will not be stored again under another
preset number.
To exit programming mode
Press PROGRAM or Ç.
ö Manual preset programming
It enables you to programme only the favorite
radio stations.
Hold down S T for fast tuning, release it
when the frequency indication starts to change.
For tuning to a weak reception radio station,
press S T briefly and repeatedly.
Repeat the steps again to store other radio
stations.
Notes:
– If you attempt to program more than 40 preset
radio stations, "PROGRAM FULL" is displayed.
– During programming, if no key is pressed within
20 seconds, the system will exit the program mode
automatically.
To exit without storing the preset setting
Press Ç.
Radio Reception
In tuner mode,
99 80
P 01
make sure "P"
select a preset
appears, if not
number
pressÉÅ .
In tuner mode,
PROG
99 80
01
PROG
99 80
P 01
store setting and exit
programming mode
/
press and hold
until "AUTO"
appears
/
tune to a radio
station
/
select a preset
number
13