Toshiba TDP-MT500 Посібник користувача - Сторінка 30
Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Toshiba TDP-MT500. Toshiba TDP-MT500 42 сторінки. Home projector
Також для Toshiba TDP-MT500: Посібник користувача (40 сторінок)
Друкувати сторінку
SETTING WITH MENUS
INSTALLATION MENU
INSTALLATION...
LANGUAGE
RGB & COMPONENT
MIRROR
KEYSTONE
PATTERN
DIASPLAY MENU
INSTALLATION...
RGB & COMPONENT
AUTO
YES?
FREQUENTCY
PHASE
H. POS
V. POS
•
The items with * mark function only for 1080i, 720p, 525p, and 625p input signals and input signals from DVI terminal.
•
The varying range of the vertical position depends on the type of the input signal. With some values the vertical position may not
change, but this is not a failure.
•
With the inputs from DVI-DIGITAL terminal, no change appear on the projected images with adjustment of the dividing ratio and
fine, but this is not a failure.
•
Without input signals, only some of the above items can be changed.
On the memory for projected image quality
This projector allows each item in the picture quality setting menu and the professional-use picture quality
setting menu (except for color temperature use-adjustment) to be adjusted to up to three kinds of favorable
picture quality for each input signal.
Input that allows the setting
VIDEO
S-VIDEO
COMPONENT 1, 2
DVI-ANALOG/DIGITAL
To store the settings:
(Refer to Page 25 for how to set menus.)
1. Set an item in the picture quality setting menu and the professional-use picture quality setting menu.
2. Reveal the signal setting menu.
3. Select "Store the setting " by pressing {, } buttons.
4. Press ENTER button.
The setting storage menu appears.
5. Select the memory where the setting is to be stored by pressing {, } buttons.
6. Press ENTER button.
The setting is stored in the memory.
To cancel the menus:
7. Press MENU button.
To apply the set picture quality:
1. Press MEMORY1, 2, or 3 button.
The picture quality of the projected image comes to the set quality.
30
ITEM
SETTING
LANGUAGE --------- -5言語 ------------ Selects a language used for displays on the screen, such as
RGB & COMPONENT ---------------- Adjusts computer video images.
AUTO * --------------------------------------- Selecting Auto and pressing ENTER button automatically
FREQUENCY *−15∼＋15 -------- If any wide streak pattern appears on the projected images, it
PHASE * ------------ 0 ∼ 31 ----------- If any flicker or blur appears on the projected images, it can be
H.POS * --------- −30 ∼ +30 ------- Moves display position of projected images in horizontal
0
V. POS * --------- −30 ∼ +30 -------- Moves display position of projected images in vertical direction.
15
MIRROR ------ FLOOR FRONT ----- Select this setting with the projector set on the floor when
0
0
---------- CEILING FRONT ---- Select this setting with the projector suspended from the
------------ FLOOR REAR ------ Select this setting with the projector set on the floor when
----------- CEILING REAR ----- Select this setting with the projector suspended from the
KEYSTONE --- −12∼＋12 -------- Select this setting when correcting trapezoidal distortion.
PATTERN ----------------------------------- Pressing ENTER button reveals the test pattern for focus
Number of settings
3
3
3
3
FUNCTION
menus. Adjusts computer video images.
adjust position and size of the projected images in
accordance with the image signals from the computer.
can be adjusted with this setting while viewing the images.
adjusted with this setting while viewing the images.
direction.
viewing the projected images from the front side.Normally,
select this setting.
ceiling when viewing the projected images from the front side.
viewing the projected images from the rear side of the screen.
ceiling when viewing the projected images from the rear side
of the screen.
Normally, select "0".
adjustment.
INSTALLATION...
SAVE
MEMORY 1
MEMORY 2
MEMORY 3