Toshiba TDP-MT700 Посібник користувача - Сторінка 13

Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Toshiba TDP-MT700. Toshiba TDP-MT700 34 сторінки. Home theater projector
Також для Toshiba TDP-MT700: Посібник користувача (36 сторінок), Посібник з експлуатації (49 сторінок)

Друкувати сторінку
Toshiba TDP-MT700 Посібник користувача
English

Controls and functions

Control panel
1
2
3
4
5
1.
POWER indicator light
Lights up or flashes when the projector is
under operation.
2.
MEMORY
Sequentially recalls settings saved in memory
locations 1, 2, and 3.
3.
ARROWS ( / )
When the on-screen menu is activated, the #2,
#3, and #10 are used as directional arrows to
select the desired menu items and to make
adjustments.
4.
ON/STANDBY
Press and hold this button to turn the projector
on when it is in the standby mode. Or press
this button twice to turn the unit off.
Remote control
Notes on remote control operation
Make sure that there is nothing between the remote control and the IR sensor on the projector
that might obstruct the infrared beam.
The effective range of the remote control is up to 8 meters from the front of the projector or 8
meters from the rear of the projector. The remote control must be held at an angle within 45
degrees of the projector's IR remote control sensor.
8 m
If the remote control stops working, or if its effective range decreases, replace the batteries
with new ones.
6
7
8
9
3
10
11
p. 32
p. 23
,
,
p. 20
p. 24
p. 32
5.
MENU
Turns the on-screen display control menu on.
Exits and saves the menu settings.
6.
Focus Ring
p.21
Adjusts the focus of the projected image.
7.
Zoom Ring
p.21
Adjusts the size of the projected image
8.
Temperature warning light
Lights up or flashes red if the projector's
temperature becomes too high.
9.
LAMP indicator light
Indicates the status of lamp.
Lights up or flashes red when the lamp has
developed a problem. Please contact your
dealer for assistance.
10. AUTO
Automatically determines the best picture
timings for the displayed image.
11. INPUT
p.26
Switches input sources sequentially.
p.32
p.32
13
Overview