Toshiba TDP-TW95 Посібник користувача - Сторінка 35

Переглянути онлайн або завантажити pdf Посібник користувача для Проектор Toshiba TDP-TW95. Toshiba TDP-TW95 46 сторінок. Usb reader, wireless lan, power zoom, auto focus
Також для Toshiba TDP-TW95: Технічні характеристики (2 сторінок)

Друкувати сторінку

Using the Wireless Utility (Continued)

Click on the

button.

The selected file's image is displayed by the projector and the Control window appears

as well.

Play the video file via the Control window.

The function of each button and box is as follows:

Current position: Indicates the playing position. Dragging the slider can move the

playing position.

Play:

Starts playing the video file.

Freeze:

The picture is paused.

Stop:

Stops playing the video file.

Volume:

Adjusts sound volume.

Mute:

Cuts off picture and sound.

Release mute:

Restores picture and sound.

Notes

• Only one file can be sent at a time. To send another file, repeat steps

• MPEG/AVI/ASF/WMV files can be transmitted.

• The update speed of the transmitted file depends on your computer's performance and the

surrounding radio environment.

• The projector ID is the MAC address of the wireless LAN USB adapter mounted on the

projector.

• The audio signals transmitted by a computer become mono.

• Playing contents protected by copyright is not supported.

■ Easy Connect utility

This feature allows users to easily connect the projector to a computer over wireless

networks, without making Network settings via Wireless Utility.

Launch the Wireless Utility software application and click the Tool button

up the Wireless LAN Setting Utility dialog box. Select a desired connection mode in

this dialog box.

and

to bring

● How to set up a simple 1:1 connection

• Setting on the projector

Turn the projector power on.

Insert the supplied wireless LAN USB adapter.

Switch the input to Wireless/USB.

Press the

button on the projector control panel.

• Setting on the computer

Launch the Wireless Utility software

application.

When the Wireless Utility launches, the

Screen Image transmission mode window

appears on the computer screen.

Click the Tool button

The Wireless LAN Setting Utility dialog box

appears.

Select Simple 1:1 connection then

click OK.

The connection starts up.

When a connection confirmation message

appears, proceed as instructed in the

message.

When the connection is complete, the

computer screen image is

transmitted.

If the transmission does not start, uncheck the Confirm and immediately transmit

screen image checkbox.

Notes

• This operation is allowed only when the Transmission mode is set to Ad hoc in the

projector network settings.

• The operation procedure of the projector setting and the computer setting can be

altered without affecting the connection setup, assuming the operation on each side

is complete within 60 seconds.

• Be sure to use Wireless Utility version 4.0.