MSI RX1300-TD128E Посібник зі швидкого встановлення

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Відеокарта MSI RX1300-TD128E. MSI RX1300-TD128E 2 сторінки. Pci express interface

Друкувати сторінку

Next-Generation HYPER Z Technology

Hierarchical Z-Buffer with Early Z Test.

Lossless Z-Buffer Compression (up to 48:1).

Fast Z-Buffer Clear.

Z Cache optimized for real-time shadow rendering.

Optimized for performance at high display resolutions, up to and

Avivo Video and Display Engine

New advanced video capabilities, including high fidelity gamma, color correction and scaling.

Dual independent display controllers that support true 30-bpp throughout the display pipe.

- Full symmetry on both heads.

- Each display controller supports display resolutions beyond 2560x1600.

Advanced DVI capabilities, including 10-bit, 16-bit HDR output.

YPrPb component output for direct drive of HDTV displays.

Seamless integration of pixel shaders with video in real time.

VIDEOSOAP

noise removal filtering for captured video.

MPEG1/2/4 decode and encode acceleration.

- DXVA support.

- Hardware motion compensation, iDCT, DCT and color space conversion.

All-format DTV/HDTV decoding.

Adaptive per-pixel de-interlacing and frame rate conversion (temporal filtering).

CrossFire

Support ( For RX1300PRO series only)

Lossless Z-Buffer Compression (up to 48:1). Multi-GPU technology ready.

Four modes of operation.

- Alternate frame rendering for maximum performance.

- Supertiling for optimal load-balancing.

- Scissoring for compatibility.

- Super AA for maximum image quality.

ardware Installation

Follow the steps

below

to install the VGA card :

1. Remove the computer case.

2. Locate the PCI Express slot on your mainboard.

Warning: Inserting the VGA card into a wrong

slot may damage your card (refer to your mainboard

manual for more Information).

3. Put the card directly over the

PCI Express

slot

and press one end of the card into the slot first.

Gently but firmly press the other end until it is

fully seated in the slot.

4. Secure the card with a bracket screw.

5. Install all other cards and devices and connect

all the cables, and then install the case.

6. Connect the monitor. Now, you are ready to

install the software on your computer.

oftware Installation (for

To install the driver of the VGA card to your computer running

please follow the steps below:

including widescreen HDTV.

1. Turn on the computer.

2. Insert the

into the CD-ROM drive. The Autorun program will start the Setup

program, and show the setup screen as follows:

3. Click ATi VGA Drivers. Follow the on-screen instructions to complete the

installation.

4. After finishing the installation, restart the computer as instructed.

nstalling MSI Live Update 3

MSI

Live Update 3

is a useful utility for you to upgrade your MSI

VGA card. Thanks to the powerful capacity of this utility, you can conveniently

download and automatically update the BIOS and the drivers on-line, without spending

much time in searching many Web sites to find the BIOS or drivers you want.

Installing from the CD-Title

1. Insert the CD into the CD-ROM drive, and start the Setup program.

2. Click the Utility tab on the setup screen.

3. Click the MSI

Live Update 3 . Follow the on-screen instructions to complete the

installation.

Installing from the MSI

Web Site

1. Link to MSI's website at http://www.msi.com.tw

2. Select /Download/ VGA on the upper part of the MSI's homepage to enter

the Download page.

3. Select Utility under the selections of VGA on the left side of the web page.

Windows XP/ 2000

)

Windows XP or 2000,

Tip : If, on your computer, the

Autorun program does not execute

automatically, please 1) enable the

CD-ROM drive Auto-detect function

from Control Panel; or 2) find and

run the setup.exe file manually from

the CD.

mainboard and

4. Find and click MSI Live Update to download the utility.

5. Unzip the downloaded utility first and then install this utility by clicking on LiveUpdate.exe.

6. Follow the on-screen instructions to complete the installation.

7. Launch MSI Live Update and to enter the main page of this utility as shown below.

The page of the MSI

Live Update 3

sing MSI Live VGA Driver Update

MSI

Live VGA Driver

Update

This service enables you to update the latest VGA driver for your VGA card.

1. To update the MSI

Live VGA Driver , click Live VGA Driver

column of the main page.

2. This utility will start checking your platform and the information on the VGA card, and

display the information in a list.

3. Click the graph button on the bottom to connect MSI Live Update Series Server.

Then, it will automatically connect the Internet and compare the version of the driver

in the database.

4. It may take several minutes to detect the required drivers. Please wait while

proceeding detection.

5. Click the InstallShield Wizard button on the right side of the table to download and

update the driver. All actions will proceed automatically.

6. Follow the on-screen instructions to complete the updating procedure.

item on the left