Epson V11H303020 - PowerLite 83+ XGA LCD Projector Посібник користувача - Сторінка 19

Переглянути онлайн або завантажити pdf Посібник користувача для Програмне забезпечення Epson V11H303020 - PowerLite 83+ XGA LCD Projector. Epson V11H303020 - PowerLite 83+ XGA LCD Projector 42 сторінки. User replaceable parts list
Також для Epson V11H303020 - PowerLite 83+ XGA LCD Projector: Посібник з експлуатації (36 сторінок), Посібник з швидкого налаштування (7 сторінок), Посібник з експлуатації (47 сторінок), Декларація про відповідність (4 сторінок), Брошура (2 сторінок), Посібник користувача (1 сторінок), Перелік деталей (1 сторінок)

Друкувати сторінку
Epson V11H303020 - PowerLite 83+ XGA LCD Projector Посібник користувача
Registering and deleting projectors for monitoring
Procedure
A
Right-click in Grouping view and select "New" - "Group".
The following window will be displayed.
Make the necessary settings while referring to the table below.
If Detail list view is displayed, select New - Group from the Edit
menu.
Group name
Enter the name of the group to be displayed in
Grouping view or Detail list view.
Up to a maximum of 32 bytes can be entered. A
space cannot be used as the first character.
Display icon
Select the icon(s) to be displayed in Grouping
view or Detail list view.
Parent group
This selects the parent group. If no groups have
been created, this cannot be selected.
Monitor
Select this to monitor all projectors that have
been registered in the group. If this is not
selected, the settings made when the individual
projectors were registered will be used.
It cannot be set when creating a new group.
You can also carry out this operation by selecting New - Group
from the Edit menu.
B
When the setup is complete, click "Register" to start the
registration. When the message is displayed, click "OK".
The icon(s) of the projector(s) you registered will be displayed in
Grouping view or Detail list view.
C
Right-click the projector icon(s) to register to the group you
have created in Grouping view or Detail list view, and select
"Edit".
You can also carry out this operation by selecting Edit in the Edit
menu.
D
In the Edit projector window, select the group name to use
for registering in Parent group and then click "Change".
The status of the group registration will be displayed as an icon in
Grouping view or Detail list view.
The registration details can also be checked using Projector list in
the View menu.
19