MSI RX9550SE-TD128 Посібник зі швидкого встановлення

Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Відеокарта MSI RX9550SE-TD128. MSI RX9550SE-TD128 2 сторінки. Msi rx9550se-td128 graphic cards: install guide

Друкувати сторінку

Support SMOOTHVISION 2.1 and HYPER Z

III+

Support SMARTSHADERTM 2.0

- Programmable pixel and vertex shaders

- Pixel shaders up to 160 instructions with 128-bit floating point precision

- Vertex shaders up to 1024 instructions with flow control

- Multiple render target support

- Shadow volume rendering acceleration

- High precision 10-bit per channel frame buffer support

- Supports DirectX 9.0 and the latest version of OpenGL

Dual integrated display controllers

Dual integrated 10-bit per channel 400 MHz DACs

Integrated 165 MHz TMDS transmitter (DVI 1.0 compliant)

Integrated TV Output support up to 1024x768 resolution

Optimized for Pentium 4 SSE2 and AMD Athlon 3Dnow!

PC 2002 compliant abs

0.13-micron process technology for higher levels of integration and higher operating clock

speeds.

Memory Interface: 64-bit / 1Channel

Peak Memory Bandwidth: 6.4GB/sec. (This value is for reference only, depending on the

type/size of memory implemented)

Bandwidth compression ratio: 8.8:1

Peak Pixel Fill Rate: 1.0 GB/s

Redering Pipeline: 4

Textures applied per pass: supports up to 16 textures per pass

Geometry Pipeline: 2

Peak vertex throughput Mvertices/sec: 125

Dual RAMDACs: 400MHz

2D Display Modes: Resolutions, colors and maximum refresh rates(Hz) in 256, 65K or 16.7M

colors

640x480

120Hz

1600x1200

800x600

120Hz

1920x1080

1024x768

120Hz

1920x1200

1152x864

120Hz

1920x1440

1280x1024

120Hz

2048x1536

ardware Installation

Follow the steps

below

to install the VGA card :

1. Remove the computer case.

2. Locate the AGP slot on your mainboard.

Warning: Inserting the VGA card into a wrong

slot (e.g. PCI slot)will damage your card (refer

to your mainboard manual for more Information).

3. Put the card directly over the AGP slot and

press one end of the card into the slot first.

Gently but firmly press the other end until it is

fully seated in the slot.

4. Secure the card with a bracket screw.

5. Install all other cards and devices and connect

all the cables, and then install the case.

6. Connect the monitor. Now, you are ready to

install the software on your computer.

oftware Installation

(for

Windows XP/ 2000

)

To install the driver of the VGA card to your computer running

please follow the steps below:

1. Turn on the computer.

2. Insert the

into the CD-ROM drive. The Autorun program will start the Setup

program, and show the setup screen as follows:

85Hz

3. Click ATI VGA Drivers. Follow the on-screen instructions to complete the

75Hz

installation.

4. After finishing the installation, restart the computer as instructed.

75Hz

65Hz

nstalling MSI Live Update 3

MSI

Live Update 3

is a useful utility for you to upgrade your MSI

VGA card. Thanks to the powerful capacity of this utility, you can conveniently

download and automatically update the BIOS and the drivers on-line, without spending

much time in searching many Web sites to find the BIOS or drivers you want.

Installing from the CD-Title

1. Insert the CD into the CD-ROM drive, and start the Setup program.

2. Click the Utility tab on the setup screen.

3. Click the MSI

Live Update 3 . Follow the on-screen instructions to complete the

installation.

Installing from the MSI

Web Site

1. Make connection to MSI's website at http://www.msi.com.tw

2. Select /Support/Live Update 3/ on the upper part of the MSI's homepage to enter

the setup page.

Click the

Update 3

with MSI

automatically, or click here (manual) to download and install the program manually.

4. Follow the on-screen instructions to complete the installation.

Windows XP or 2000,

Tip : If, on your computer, the

Autorun program does not execute

automatically, please 1) enable the

CD-ROM drive Auto-detect function

from Control Panel; or 2) find and

run the setup.exe file manually from

the CD.

sing MSI Live VGA Driver Update

MSI

Live VGA Driver

This service enables you to update the latest VGA driver for your VGA card.

1. To update the MSI

column of the main page.

2. This utility will start checking your platform and the information on the VGA card, and

display the information in a list.

3. Click the graph button on the bottom to connect MSI Live Update Series Server.

mainboard and

Then, it will automatically connect the Internet and compare the version of the driver

in the database.

4. It may take several minutes to detect the required drivers. Please wait while

proceeding detection.

5. Click the InstallShield Wizard button on the right side of the table to download and

update the driver. All actions will proceed automatically.

6. Follow the on-screen instructions to complete the updating procedure.

InstallShield Wizard button to have the program of MSI

Live

Live monitor downloaded and installed on your system

The page of the MSI

Live Update 3

Update

Live VGA Driver , click Live VGA Driver

item on the left