MSI CB11B Швидкий старт - Сторінка 2
Переглянути онлайн або завантажити pdf Швидкий старт для Комп'ютерне обладнання MSI CB11B. MSI CB11B 3 сторінки. Wireless cardbus 11b
Друкувати сторінку
Start here.
Preparation.
Introduction...
Check...
Thank you for purchasing MSI Wireless 11b CardBus
Unpacking the box, and you should find:
CB11B. In the fast growing network environment,
Wireless 11b CardBus CB11B
CB11B provides you with an innovative and convenient
User's Guide and Quick Start Guide
solution that lets you connect to the network without
CD-ROM containing the user manual, quick start
limitation, whether in office, at home, or even on the go.
guide, drivers and utilities
Product view...
How to use this guide...
CB11B is a CardBus-standard wireless device. It provides
This Quick Start Guide describes the features of CB11B,
one Power LED and one Link LED on the panel, so you can
and provides the steps needed to install and setup your
monitor your CB11B and real-time network status.
CB11B. You can know your CB11B well and complete
basic installation through the "instruction box" in this
guide:
Check the product and system requirements,
see 1a, 1b, 1c.
Connect hardware:
laptop PC users, see 2a.
desktop PC users, see 2b.
Set up software, see 3a,3b.
Link LED
diagram of software installation, see 3c.
Power LED - solid blue to indicate that CB11B is powered on
Configuration:
Ad-Hoc mode and diagrams, see 4a, 4c.
Infrastructure mode and diagrams, see 4b, 4d.
Test your networking, see 5a, 5b.
System requirements...
Please note that all figures in this guide are for reference
Laptop/desktop PC with PCMCIA slot and CD-ROM drive
only; the actual setup screens may be vary on different
(2X or higher)
system. For more information, please visit MSI website:
Microsoft Windows 98SE/ME/2000/XP
http://www.msi.com.tw
Minimum 5MB free disk space
Connect hardware.
For laptop PC users...
Locate the PCMCIA slot and insert your CB11B into the
slot (for more instruction about the usage of PC card slot,
please see your laptop PC's manual). PCMCIA module is
a "plug & play" device, so it can be installed without
shutting down your computer.
a
a
MSI
MICRO-STAR INTERNATIONAL
For desktop PC users...
If you use CB11B on a desktop PC, an optional PCI-to-
PCMCIA adapter will be needed. Locate the PCMCIA slot
- blinking blue to indicate that CB11B is receiving
and insert your CB11B into the slot.
or transferring data
b
b
115V
115V
C
C
Set up software.
Start the Setup program...
Your computer will detect a new device and start to install
its driver and utilities as you connect CB11B for the first
time. Insert the enclosed driver CD into the CD-ROM
drive of your computer, and the Setup program should
start automatically (shown as below). Otherwise, go to
Start -> Run from the taskbar, and type E:\setup.exe
(where E is your CD drive).
Insert CB11B into
your laptop PC
Click here to
a
a
start setup
To install...
1. Click Next on the welcome window of the InstallShield
Wizard, then choose "I accept the terms in the license
Insert CB11B into your
desktop PC with an
agreement" and click Next to continue installing.
optional adapter
Otherwise, click Cancel to exit the program.
2. Enter user's information and click Next.
3. Click Install to start, then click Finish to continue
when the installation completed.
4. InstallShield Wizard may ask you to restart the
computer, choose Yes to reboot.
5. After rebooting, you can see a MSI Wireless LAN icon
b
b
on the taskbar.
Software installation...
Click
Check here
Click
a
a
Click
MSI Wireless LAN
c
c
b
b
Setting.
Ad-Hoc Mode (computer-to-computer)
1. Double click the MSI Wireless LAN icon on the task bar.
2. Click Advanced on the pop-up window.
3. Click Add... to add a new network.
4. Set up the Network Name (SSID) and the Network Key.
5. Check the last item to enable the Ad-Hoc mode, then
click OK to finish the settings for the first computer
(Administrator).
6. Any one who wants to access this Ad-Hoc network
should repeat step 1 to 3. In step 3, you will see the
network set by the first computer. Then, choose it and
click OK.
a
a
Infrastructure Mode
(computer-to-access point)
1. Double click the MSI Wireless LAN icon on the task bar.
2. Click Advanced on the pop-up window.
3. A list of Available Network appears in the window.
Click Configure to set up the network selected.
4. As an administrator, you can change the Network Name
and Network Key.
5. You may also choose the networks you prefer from the
Available Networks list and use the Move up/Move
down to set the priority network.
6. Click OK. Now you can access the wireless network in
Infrastructure mode.
b
b