CROWNMARK Candence B4510-Q-BED Інструкція з монтажу - Сторінка 2
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Внутрішнє оздоблення приміщень CROWNMARK Candence B4510-Q-BED. CROWNMARK Candence B4510-Q-BED 2 сторінки.
Друкувати сторінку
STEP 3 :
Tighten the 4 Corner with Allen Key (2).Fix the Bed Slat Support Leg (E ), to Bed Slat (D) as shown . Install the bed
rail ( F ) & ( G ) and tighten with Csk Screw ( 6 ) as per diagram shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED
LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY)
STEP 3.2 :
STEP 3.3 :
D
E
E
leveler
8x
6
STEP 3.4 :
F
Push the side rail(F) & (G) meet with wooden
D
slat(D) and fix the CSK screw (6)
by using the Screw Driver.
NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
ASSEMBLY INSTRUCTIONS
STEP 3.1 :
leveler
2
slat ( D ) to side
STEP 3.5 :
ON & OFF TOUCH
H
SWITCH SENSOR
BUTTON
leveler
COMPLETE ASSEMBLY
Plug into electrik outlet
Plug into adaptor (3)
7
BACK VIEW
PAGE 2 OF 2