Croydex 5012044112446 Інструкція з монтажу Посібник з монтажу - Сторінка 3
Переглянути онлайн або завантажити pdf Інструкція з монтажу Посібник з монтажу для Внутрішнє оздоблення приміщень Croydex 5012044112446. Croydex 5012044112446 8 сторінок. Foil wrapped flat pack cabinets
Друкувати сторінку
SECTION 2 - CABINET ASSEMBLY
TOOLS REQUIRED
1.
Screw in four locking cam pins (B) into
both side panels (H) in the holes indicated
below using a cross head screwdriver.
DO NOT OVERTIGHTEN!
(See Fig. 1)
fig. 1
locking cam pin holes
2.
Insert four wooden dowels (C) into both
side panels (H) in the holes indicated below.
DO NOT USE A HAMMER TO INSERT THE
DOWELS!
(See Fig. 2)
fig. 2
dowel holes
3.
Insert four cam locks (A) into both top/
bottom panels (I). Ensure the pointed arrow
is facing the ends of the panel as shown.
DO NOT OVERTIGHTEN!
(See Fig. 3)
fig. 3
Pointed Arrow
4.
Select one top/bottom panel (I) to be
your bottom panel and lay it down flat.
Select one side panel (H) to be your left
side panel and locate it onto the dowels/
locking cam pins. Ensure that the grooves
in both panels are located towards the rear
of the cabinet. Once seated rotate the cam
locks (A) through 90° clockwise to secure in
DO NOT OVERTIGHTEN!
place.
(See Fig. 4)
fig. 4
5.
Insert back panel (J) ensuring it sits in the
grooves properly.
IMPORTANT:
Ensure the back panel is
facing the correct direction. The larger face
should be facing the front of the cabinet.
(See Fig. 5)
fig. 5
3
Grooves
This surface
should face
the front!
CAB 150 R01