Croydex WS010731 Інструкція з експлуатації
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Внутрішнє оздоблення приміщень Croydex WS010731. Croydex WS010731 13 сторінок. Chinnock vanity units
Друкувати сторінкуChinnock Vanity Units
your
This installation guide applies to the following vanity unit:
WS010522 - Chinnock Vanity Unit (46cm)
WS010722 - Chinnock Vanity Unit (36cm)
WS010731 - Chinnock Vanity Unit (36cm)
Tools required - not supplied
Pencil;Tape Measure; Philips Screwdriver; Flat Head Screwdriver; Mallet; Drill; 8mm Drill Bit
(Ceramic drill bit optional).
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN
Home Safety Advice
- Always take care when using power tools, particularly in the bathroom.
- Always check for hidden cables and pipework before drilling and take extreme care if there is any
water in the working area.
- It is advisable to use a residual current circuit breaker (RCCB).
- Always wear suitable eye protection when drilling.
- Always ensure that the drill hole passes through the central tiled area rather than through the grouted
area. To prevent damage to the tile, mask the area around the hole with tape before drilling.
- Do not strike the product with hard or sharp objects.
Product Care
Do not use abrasive or chemical cleaners as these will damage the product.
Product Location
of the wall.
The addition of backboards on the outside of the wall or appropriate strengthening of internal structures
may be required to provide adequate wall strength.
NOTE: If the wall is made of lightweight thermal blocks, aerated hollow brickwork or prefabricated
suddenly applied to the vanity unit.
1
.
CAB 095 R03