CRRC MS-2624PT Інструкція з експлуатації - Сторінка 15
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Інструменти CRRC MS-2624PT. CRRC MS-2624PT 17 сторінок. Hydraulic installation tool
Друкувати сторінкуAPPENDIX 1 - List of Warranty and Life Cycle
P.N.
MS-2624PT-01 Cylinder ASSY.
MS-2624PT-02 Piston
TOOL
MS-2624PT-04 Handle
MS-2624PT-14 Pipe
N/A
MS-2624PT-15 Trigger Switch
Wear parts
MS-5106-01
MS-5106-02
MS-5106-03
*1: whichever comes first shall be prevailed.
Note: the Warranty and Life Cycle are based on standard operation and proper maintenance
without artificial damage.
Requirements on replacing consumables and wear parts:
1. the trained bench worker is required using specific tools.
2. the warranty period of TOOL components shall NOT be re-calculated by replacing wear parts.
3. if the TOOL is failed during warranty period, please send it to Meishan or its authorized service
center to repair.
Requirements for use:
1. Check and confirm no obvious crack on tool;
2. Hold tool trigger depressed for 30 seconds; depress trigger a few times to cycle tool and to
circulate hydraulic fluid. Observe action of tool and check for leaks.
3. Check and confirm the pressure is correct.
Desc.
Warranty
1 year/50,000 pulls*
1 year/50,000 pulls*
1 year/50,000 pulls*
1 year/50,000 pulls*
Seals Kit
20,000 pulls
20,000 pulls
Anvil
20,000 pulls
Collect ASSY.
20,000 pulls
Rubber Jaw
5,000 pulls
13
Life Cycle
1
\
1
\
1
\
1
\
\
\
20,000 pulls
20,000 pulls
5,000 pulls