CRRC MS-ZD20S Посібник з експлуатації та обслуговування - Сторінка 5
Переглянути онлайн або завантажити pdf Посібник з експлуатації та обслуговування для Інструменти CRRC MS-ZD20S. CRRC MS-ZD20S 9 сторінок. Battery installation tool
Друкувати сторінку眉山中车紧固件科技有限公司
Battery Installation and Removal
The battery is equipped with the locking press-button.
Inserting the battery into battery tool and pressing the locking press-button until it's firmly locked.
Pressing down the locking press-button to remove the battery from battery tool. Do not remove battery directly
and hard.
Working Mode
·The battery tool has function of overload protection, for example, if there's overload situation the rivet process
will stop immediately and fault indicator will demonstrate red light. In above case, please remove and re-insert the
battery and press switch to let jaw back to original position.
·The control device can indicate block when it returns (for example, any debris, dirt, etc., existed in steel metal).
Meantime, the battery tool will stop working and back to end place. The fault indicator will demonstrate red light.
The operator can detect fault before removes the battery, then re-inserts the battery to actuate battery tool.
·The indicator will be actuated when the riveting starts. The indicator will be stopped, if there's no operation in
30s.
Disassembly of Jaw and Anvil
A.（a）Fixing sleeve （b）Limit fixing sleeve （c）Adjusting sleeve （d）Limit sleeve （e）Anvil（f）Snap
ring （g）Jaw
B. Loosening and disassembling the anvil (e) from limit sleeve (d) by wrench with counterclockwise rotation.
C. Loosening and disassembling the limit fixing sleeve (b) and fixing sleeve (a) in sequence from machine by
wrench with counterclockwise rotation.
D. One hand presses snap ring (f) along the direction of arrow and the other rotates the jaw (g) along
counterclockwise direction to loosen and disassemble.
Note: All parts are disassembled by rotating along counterclockwise direction.
5