3Com AirProtect Sensor 5750 Посібник зі швидкого встановлення
Переглянути онлайн або завантажити pdf Посібник зі швидкого встановлення для Бездротова точка доступу 3Com AirProtect Sensor 5750. 3Com AirProtect Sensor 5750 15 сторінок.
Друкувати сторінку
®
3Com
AirProtect Sensor 5750
3CRWX5750GS / Model WL-548A
The 3Com® AirProtect Sensor 5750 provides dual-radio IEEE 802.11a and 802.11b/g wireless
intrusion prevention (WIP) capability for your network. The sensor is designed for use with a 3Com
AirProtect WIPS Engine 6100, and requires hardware installation only. You must have a 3Com
AirProtect Engine 6100 installed on your network to operate the sensor.
Power is supplied using Power Over Ethernet (PoE). The following 3Com PoE devices, or any third-
party 802.3af compliant PoE solution, may be used to supply power to the sensor:
•
3Com WX1200
•
3Com WXR100
About This Guide
This Quick Installation Guide describes the basic setup of the sensor. It covers the following topics:
•
3Com AirProtect Sensor 5750 Features
•
Observing Safety Precautions
•
Step 1: Unpacking the Sensor
•
Step 2: Preparing for Installation
•
Step 3: Attaching the Antennas
•
Step 4: Mounting the Sensor
•
Step 5: Connecting Power and the Network
•
Step 6: Checking the LED Indicators
•
Troubleshooting
•
Regulatory Information
Quick Installation Guide
•
3Com PoE Injector
•
Any 3Com 802.3af compliant PoE Switch