aeolus PW-001 Посібник користувача - Сторінка 3
Переглянути онлайн або завантажити pdf Посібник користувача для Засіб для догляду за домашніми тваринами aeolus PW-001. aeolus PW-001 4 сторінки. Pet washer shampoo diluter
Друкувати сторінку
Installation
1. Use the drilling template to align and drill four
ø4 holes in the wall. Use expansion screws to
mount the hooks on the wall.
Hook×2
Expansion
tube×5
Expansion
screw×5
Blocking plate×1
Thumb screw×1
3. If the wall is clad with ceramic tiles, use the
thumb screw to fix the blocking unit onto the
bottom of the unit. Remove the protection on the
double-sided adhesive tape and stick the unit on
the wall.
If the wall is not clad with ceramic tiles, expansion
bolts should be used to fix the blocking unit onto
the wall.
Blocking plate
Thumb screw
5. Install four metering tips in the four shampoo
ports according to the Dilution Table of Metering
Inserts. Before inserting the tips, apply some
shampoo on their silicone gaskets for lubrication.
Make sure that the gaskets are inside the port.
Metering tips
2. Mount the unit on the hook.
4. Attach inlet pipe and outlet pipe.
Note: Sealing gaskets should be put in
before screwing the pipes.
Inlet pipe
Sprayer Hose
6. Install the shampoo pipes onto the
ports in the 2-3-4-1 order marked.
Shampoo pipe
02
7. Connect the pipe to the shampoo/conditioner caps and screw the cap tight on the shampoo
bottle.
Shampoo Source Knob
(4)Shampoo Hose
(4)Shampoo
8. After installation, turn on the water supply to check for any leakage. If the shampoo can be
sucked into the pipes rapidly, the unit can be in use.
Parts List
Part
Quantity
Bathing Unit
1
Hand shower
1
Discharge Hose
1
Bracket
1
Tubes
1
Shampoo Inlet Hose
4
Water Inlet Hose
1
Hot Water
Function Knob
Bathe/Rinse
Inlet Hose
Sprayer Hose
Part
Quantity
Shampoo
4
/ Conditioner Caps
Filter Seal
1
Gaskets
4 (in caps)
Hooks
2
Setscrews Φ4
8
Drills Φ4
1
Template
1
03