Dimplex Quantum series Посібник з монтажу та експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу та експлуатації для Електричний обігрівач Dimplex Quantum series. Dimplex Quantum series 12 сторінок.
Також для Dimplex Quantum series: Посібник із швидкого старту (12 сторінок)

Друкувати сторінку

Dimplex Quantum series Посібник з монтажу та експлуатації

Building the Heater Core

Energy Cells

The energy cells are supplied separately to the heater in packs of three. The item code is 047243.

Make sure that energy cells are kept dry. Energy cells should not be exposed to moisture and not installed if this

has occurred.

11. Remove the inner front and insulation to gain access to

the core of the heater.

Lay the inner front carefully to one side to ensure the

insulation is not damaged. (Fig. 11)

13. The energy cells have several grooves on one surface

for locating around the elements. The two slots through the

centre of the energy cell create the air passages within the

core.

Position the ﬁ rst energy cell of the bottom row to the

right, ﬁ rmly pressed against the side insulation with the

element grooves facing upwards and ﬁ tting neatly under

the element.

Position the second energy cell in the row against the left-

hand insulation.

Fit the remaining energy cells to the bottom row, being

careful not to damage or dislodge the element.

NOTE:

The bends in the element locate around the grooves

in the energy cell to secure the element.

- 9 -

Fig. 11

12. Remove the cardboard element support and dispose of.

(Fig. 12)

Fig. 13

14. Position the second row of energy cells on top of the

ﬁ rst but this time the energy cells must be upside down

ensuring the grooves are positioned over the elements.

(Fig. 14)

IMPORTANT:

The element tails must extend no further

than 30mm into the right hand chamber

Fig.

Fig. 12

Fig. 14