Dimplex DCP11MULTI Інструкція з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Кондиціонер Dimplex DCP11MULTI. Dimplex DCP11MULTI 19 сторінок. Multidirectional portable air conditioner
Друкувати сторінку
Error Codes
ERROR CODES
E1 - Indicates open circuit or short circuit in temperature sensor and PCB.
E2 - Indicates open circuit or short circuit in temperature sensor, copper tube and
PCB.
E4 - Indicates the internal water container is full. Refer to the Water Drainage section
below.
dF - indicates the appliance is defrosting.
Overheat Protection - This unit is fitted with an overheat prevention device. If the
unit overheats it will automatically turn OFF. The unit can be restarted after 30
minutes.
Water Drainage
WATER DRAINAGE METHOD
When there is excess water condensation inside the unit, the unit will stop running
and the error code 'E4' will display. This indicates that the water needs to be drained
using the following procedure:
Manual Drainage:
1. Switch off and unplug the unit.
2. Move the unit to a suitable location to drain
the water. Consider placing a tray or suitable
container under the outlet to catch any water.
3. Remove the drain plug (2) refer to diagram.
4. Slightly tilt the unit to the rear and drain the
water out.
5. Replace the drain plug before next use.
13