Aeon Labs Aeotec Посібник користувача - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник користувача для Вимірювальні прилади Aeon Labs Aeotec. Aeon Labs Aeotec 11 сторінок. Home energy meter
Також для Aeon Labs Aeotec: Посібник користувача (7 сторінок), Посібник (9 сторінок)

Друкувати сторінку
Aeon Labs Aeotec Посібник користувача
17.09.2018
1. Connect 5V DC Adapter to the Garage Door Controller. Its Network LED will begin to blink.
2. If your Z-Stick is plugged into a gateway or a computer, unplug it.
3. Take your Z-Stick to your Garage Door Controller.
4. Press the Action Button on your Z-Stick.
5. Press the Z-Wave Button on Garage Door Controller.
6. If Garage Door Controller has been successfully linked to your Z-Wave network, its Network LED will no longer
blink.
7. If the linking was unsuccessful and the Network LED continues to blink, repeat the steps above.
8. Press the Action Button on the Z-Stick to take it out of inclusion mode.
If you're using a Minimote:
1. Connect 5V DC Adapter to the Garage Door Controller. Its Network LED will begin to blink.
2. Take your Minimote to your Garage Door Controller.
3. Press the Include button on your Minimote.
4. Press the Z-wave Button on your Garage Door Controller.
5. If Garage Door Controller has been successfully linked to your Z-Wave network, its Network LED will no longer blink.
If the linking was unsuccessful and the Network LED continues to blink, repeat the steps above.
With your Garage Door Controller now working as a part of your smart home, you'll be able to configure it from your
home control software or phone application. Please refer to your software's user guide for precise instructions on
configuring Garage Door Controller to your needs.
Alarm Testing (after pairing to your network)
The speaker system is 105dB, you can test its sounds and volume settings via long pressing the "Button-" or "Button+" to
initiate sound testing, where pressing and holding "Button+" will switch to the next sound and pressing and holding
"Button-" will switch to the previous sound. While the sound is playing in a loop, you can tap "Button-" to decrease the
sound while "Button+" will increase the volume. This will help you gauge an idea on how you'd like to configure your
settings for Opening/Closing/Unknown/Closed position alarms.
Physically Install your Garage Door Controller.
WARNING — TO REDUCE THE RISK OF SEVERE INJURY OR DEATH:
https://aeotec.freshdesk.com/support/solutions/articles/6000053811-garage-door-controller-gen-5-user-guide-
Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs
4/11