Aeon Labs Aeotec MULTISENSOR 6 Посібник - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник для Датчики безпеки Aeon Labs Aeotec MULTISENSOR 6. Aeon Labs Aeotec MULTISENSOR 6 14 сторінок.
Також для Aeon Labs Aeotec MULTISENSOR 6: Посібник користувача (11 сторінок)

Друкувати сторінку

Labs' affiliates, shareholders, directors, officers, employees,

contractors, agents and other representatives harmless from all

demands, claims, actions, causes of action, proceedings, suits,

assessments, losses, damages, liabilities, settlements, judgments,

fines, penalties, interest, costs and expenses (including fees and

disbursements of counsel) of every kind (i) based upon personal

injury or death or injury to property to the extent any of the foregoing

is proximately caused either by a defective product (including strict

liability in tort) or by the negligent or willful acts or omissions of

Customer or its officers, employees, subcontractors or agents, and/

or (ii) arising from or relating to any actual or alleged infringement

or misappropriation of any patent, trademark, mask work, copyright,

trade secret or any actual or alleged violation of any other

intellectual property rights arising from or in connection with the

products, except to the extent that such infringement exists as a

result of Aeon Labs' manufacturing processes.

IN NO EVENT SHALL AEON LABS BE LIABLE FOR ANY INDIRECT,

INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES, OR

DAMAGES FOR LOSS OF PROFITS, REVENUE, OR USE INCURRED

BY CUSTOMER OR ANY THIRD PARTY, WHETHER IN AN ACTION

IN CONTRACT, OR TORT, OR OTHERWISE EVEN IF ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES. AEON LABS' LIABILITY AND

CUSTOMER'S EXCLUSIVE REMEDY FOR ANY CAUSE OF ACTION ARISING

IN CONNECTION WITH THIS AGREEMENT OR THE SALE OR USE OF THE

PRODUCTS, WHETHER BASED ON NEGLIGENCE, STRICT LIABILITY,

BREACH OF WARRANTY, BREACH OF AGREEMENT, OR EQUITABLE

PRINCIPLES, IS EXPRESSLY LIMITED TO, AT AEON LABS' OPTION,

REPLACEMENT OF, OR REPAYMENT OF THE PURCHASE PRICE FOR

If your Z-Stick is plugged into a gateway or a computer, unplug it.

Take your Z-Stick to your MultiSensor.

Press the Action Button on your Z-Stick.

Press the Action Button on your MultiSensor.

You can test if your MultiSensor has been successfully included

into your Z-Wave network by pressing its Action Button. If you

press the button and your sensor's green LED is solid for a

few seconds, then inclusion has been successful. If the green

LED blinks when the button is pressed, the inclusion has been

unsuccessful and you should repeat the above steps.

Press the Action Button on the Z-Stick to return it to inclusion

mode. Return it to your gateway or computer.

If you're using a Minimote:

Include

Take your Minimote to your MultiSensor.

Press the Include button on your Minimote.

Press the Action Button on your MultiSensor.

You can test if your MultiSensor has been successfully included

into your Z-Wave network by pressing its Action Button. If you

press the Action Button and your sensor's green LED is solid for