Pioneer AppRadio SPH-DA01 Посібник з експлуатації - Сторінка 12
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Автомобільний приймач Pioneer AppRadio SPH-DA01. Pioneer AppRadio SPH-DA01 32 сторінки. Display unit appradio
Також для Pioneer AppRadio SPH-DA01: Посібник з експлуатації (36 сторінок), Важлива інформація для користувача (24 сторінок), Посібник з монтажу (40 сторінок), Оновлення прошивки (4 сторінок)
Друкувати сторінку
Chapter
04
Using the radio
! ON
Turns on CT function.
Tuning into alternative frequencies
You can select to enable or disable the AF (Al-
ternative frequency) function.
If you are listening to a broadcast and the re-
ception becomes weak or there are other pro-
blems, this product will automatically search
for a different station in the same network that
is broadcasting a stronger signal.
1
Tap
to open the optional menu.
2
Tap [AF].
Each tap of [AF] changes the setting as fol-
lows:
! ON (default):
Turns on AF function.
! OFF:
Turns off AF function.
Limiting stations to regional
programming
When AF is used to automatically retune fre-
quencies, the regional (REG) function limits
the selection to stations broadcasting regional
programmes.
1
Tap
to open the optional menu.
2
Tap [REG].
Each tap of [REG] changes the setting as fol-
lows:
! ON (default):
Turns on REG function.
! OFF:
Turns off REG function.
Receiving traffic announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an-
other enhanced network's TP station (a station
carrying information that cross-references TP
stations).
12
Engb
1
Tap
to open the optional menu.
2
Tap [TA].
Each tap of [TA] changes the setting as fol-
lows:
! ON (default):
Turns on TA function.
! OFF:
Turns off TA function.
Setting the volume for traffic
announcements
% Use the Volume (+/–) button to adjust
the TA volume when a traffic announce-
ment begins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
Searching for an RDS station by PTY
information
You can search for general types of broadcast-
ing programmes.
= For details, refer to PTY list on the next
page.
1
Tap
to open the optional menu.
2
Tap [PTY List].
3
Scroll through the list and tap the pro-
gramme type you want to search.
The tuner searches for a station broadcasting
that programme type.
p The programmes of some stations may dif-
fer from that indicated by the transmitted
PTY.
p If no station is broadcasting the type of pro-
gramme you searched for, the tuner returns
to the original station.