Pioneer AVIC-N3 Посібник з експлуатації обладнання - Сторінка 23
Переглянути онлайн або завантажити pdf Посібник з експлуатації обладнання для Автомобільний приймач Pioneer AVIC-N3. Pioneer AVIC-N3 27 сторінок. Dvd multimedia av navigation server
Також для Pioneer AVIC-N3: Посібник користувача (34 сторінок), Посібник із швидкого старту (2 сторінок)
Using the Display Correctly
• If liquid or foreign matter should get inside
this navigation system, turn off the power
immediately and consult your dealer or the
nearest authorized PIONEER Service Sta-
tion. Do not use the navigation system in
this condition because doing so may result
in a fire, electric shock, or other failure.
• If you notice smoke, a strange noise or
smell from the navigation system, or any
other abnormal signs on the LCD screen or
Sub display, turn off the power immedi-
ately and consult your dealer or the near-
est authorized PIONEER Service Station.
Using this navigation system in this condi-
tion may result in permanent damage to
the system.
• Do not disassemble or modify this naviga-
tion system, as there are high-voltage
components inside which may cause an
electric shock. Be sure to consult your
dealer or the nearest authorized PIONEER
Service Station for internal inspection,
adjustments or repairs.
Handling the display unit
• When the LCD panel is subjected to direct sun-
light for a long period of time, it will become
very hot resulting in possible damage to the
LCD screen. When not using this navigation
system, close the LCD panel and avoid expos-
ing it to direct sunlight as much as possible.
• The display unit should be used within the tem-
perature ranges shown below.
• Operating temperature range: +14 °F to +122
°F
• Storage temperature range: –4 °F to +176 °F
• Do not use the display unit at temperatures
higher or lower than the operating temperature
range because the display unit may not oper-
ate normally and the display unit can be dam-
aged.
• The LCD screen is exposed in order to increase
its visibility within the vehicle. Please do not
press strongly on it as this may damage it.
• Do not place anything on the LCD panel when
it is deployed. Also, do not attempt to carry out
angle adjustment, or open/close the LCD panel
by hand. Applying strong force to the LCD
panel may damage it.
• Do not push the LCD screen with much force
as this may scratch it.
• Never touch the LCD screen with anything
besides your finger when operating the Touch
Panel functions. The LCD screen can scratch
easily.
• Be careful not to place anything between the
LCD panel and the main body when the LCD
panel is opening or closing. If an object gets
between the LCD panel and main body, the
LCD panel may stop working.
• Be careful of fingers, long hair, and loose
articles of clothing which could possibly
get caught between the LCD panel and the
main body and cause serious injury.
Liquid crystal display (LCD)
screen
• If the LCD panel is near the vent of an air con-
ditioner when it is opened, make sure that air
from the air conditioner is not blowing on it.
Heat from the heater may break the LCD
screen, and cool air from the cooler may cause
moisture to form inside the display unit result-
ing in possible damage. Also, if the LCD panel
is cooled down by the cooler, the LCD screen
may become dark, or the life span of the small
fluorescent tube used inside the LCD panel
may be shortened.
• Small black dots or white dots (bright dots)
may appear on the LCD screen. These are due
to the characteristics of the LCD screen and do
not indicate a problem with the display unit.
• At low temperatures, the LCD screen may be
dark for a while after the power is turned on.
• The LCD screen will be difficult to see if it is
exposed to direct sunlight.
• When using a portable phone, keep the
antenna of the portable phone away from the
display unit to prevent disruption of the video
by the appearance of spots, colored stripes,
etc.
21