Pioneer AVIC-Z720DAB Посібник з монтажу - Сторінка 10

Переглянути онлайн або завантажити pdf Посібник з монтажу для Автомобільний приймач Pioneer AVIC-Z720DAB. Pioneer AVIC-Z720DAB 17 сторінок. Navigation av system
Також для Pioneer AVIC-Z720DAB: Посібник із швидкого старту (16 сторінок), Інструкція з оновлення мікропрограми системи (5 сторінок)

Dashboard

Rear shelf

• When installing the GPS aerial inside the

vehicle, be sure to use the metal sheet

provided with your system. If this is not

used, the reception sensitivity will be

poor.

• Do not cut the accessory metal sheet.

This would reduce the sensitivity of the

GPS aerial.

• Take care not to pull the aerial lead when

removing the GPS aerial. The lead may

become detached.

• Do not paint the GPS aerial, as this may

affect its performance.

When installing the aerial inside the vehicle (on the dashboard or rear

shelf)

WARNING

Do not install the GPS aerial over any sensors or vents on the dashboard of the vehicle, as

doing so may interfere with the proper functioning of such sensors or vents and may

compromise the ability of the metal sheet under the GPS aerial to properly and securely

affix to the dashboard.

Make sure the surface is free of

moisture, dust, grime, oil, etc.,

before affixing the metal sheet.

GPS aerial

Metal sheet

Peel off the protective sheet on the rear.

Double-sided tape

Clamps

Use clamps to secure the lead where necessary inside the vehicle.

NOTES

• Affix the metal sheet on the surface as level as possible where the GPS aerial faces the

window.

• Affix the GPS aerial on the metal sheet using the double-sided tape.

• The metal sheet contains a strong adhesive which may leave a mark on the surface if it is

removed.

• When attaching the metal sheet, do not cut it into small pieces.

• Some models use window glass that does not allow signals from GPS satellites to pass

through. On such models, install the GPS aerial on the outside of the vehicle.