Pioneer DEH-1100MP Посібник користувача - Сторінка 16

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільний приймач Pioneer DEH-1100MP. Pioneer DEH-1100MP 24 сторінки. Cd rds receiver
Також для Pioneer DEH-1100MP: Брошура (9 сторінок), Посібник з монтажу (8 сторінок)

Pioneer DEH-1100MP Посібник користувача
Section
04
Installation
Removing the unit
1
Extend top and bottom of the trim ring
outwards to remove the trim ring. (When
reattaching the trim ring, point the side
with a groove downwards and attach it.)
! It becomes easy to remove the trim ring if
the front panel is released.
2
Insert the supplied extraction keys into
both sides of the unit until they click into
place.
3
Pull the unit out of the dashboard.

DIN Rear-mount

1
Extend top and bottom of the trim ring
outwards to remove the trim ring. (When
reattaching the trim ring, point the side
with a groove downwards and attach it.)
! It becomes easy to remove the trim ring if
the front panel is released.
16
En
Trim ring
Trim ring
2
Determine the appropriate position
where the holes on the bracket and the
side of the unit match.
3
Tighten two screws on each side.
Screw
Mounting bracket
! Use either truss screws (5 mm × 8 mm) or
flush surface screws (5 mm × 9 mm), de-
pending on the shape of screw holes in the
bracket.

Fastening the front panel

If you do not plan to detach the front panel,
the front panel can be fastened with supplied
screw.
Screw
Dashboard or console