Pioneer DEH-1200MP Посібник користувача - Сторінка 8
Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільний приймач Pioneer DEH-1200MP. Pioneer DEH-1200MP 21 сторінка. Cd receiver
Друкувати сторінку
Section
ID (
Operating this unit
You can switch the search method between fast for-
ward/reverse and searching every 10 tracks. Selecting
ROUGH enables you to search every 10 tracks.
T
Press
~
to select ROUGH.
FF/REV - Fast forward and reverse
ROUGH - Searching every 10 tracks
To select FF/REV. press ....
~~
Press
BAND/ESC
to return to the playback dis-
play.
:l
Press and hold ... or
~
to search every 10 tracks
on a disc (folder)
If the rest of track number is less than 10. press
and hold'" or
~
recalls the first (last) one.
Audio Adjustments
Audio Adjustments
•
Press A (audio) to select the audio func-
tion.
After selecting, perform the following proce-
dures to set the audio function.
You can change the fader/balance setting.
1
Press. or
~
to adjust front/rear speaker balance.
Adjustment range (front/rear): FAD F15 to FAD
R15
FAD 0 is the proper setting when only two speak-
ers are used.
-..£
Press ... or
~
to adjust left/right speaker balance.
Adjustment range (left/right)
BAll15
to
BAl
R15
You can adjust the bass/mid/treble level.
•
Adjusted equalizer curve settings are stored in
CUSTOM.
:-1._.
Press. or
~
to adjust the level.
Adjustment range: +6 to-6
Loudness compensates for deficiencies in the low·
and high-frequency ranges at low volume.
T
Press. or
~
to turn loudness on or off.
-2 Press ... or
~
to select the desired setting.
lOW
(Iow)-HI (high)
)
SLA
(Source level adjustment) lets you adjust the vo-
lume level of each source to prevent radical changes
In
volume when sWitching between sources
•
Settings are based on the FM volume level. which
remains unchanged.
Before adjusting source levels. compare the FM
volume
level with the level of the source you wish
o adjus .
•
The AM volume level can also be adjusted with
source level adjustments.
IT:
Press. or
~
to adjust the source volume
Adjustment range
SlA +4
to
SLA-4
gNote
You can also turn loudness on or off by pressing
and holding
EQ/LOUD.
Using the equalizer
•
Press EQ/lOUD to select the equalizer.
DYNAMIC-VOCAl-NATURAl-CUSTOM
-FLAT-POVVERFUl
• CUSTOM
allows you to create a customized
setting.
•
When
FLAT
is selected no adjustments are
made to the sound.
0
Other Functions
Adjusting initial settings
1
Press SRC/OFF and hold until the unit
turns off.
2
Press SRC/OFF and hold until the clock
appears in the display.
3
Press F (function) to select the initial
setting.
After selecting, perform the following proce-
dures to set the initial setting.
, 1
Press ... or
~
to select the segment of the clock
display you wish to set
Hour-Minute
2
Press. or
~
to put a clock right.
CD
En