Pioneer DEH-1300MP Посібник користувача - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільний приймач Pioneer DEH-1300MP. Pioneer DEH-1300MP 28 сторінок. Cd receiver, autoradio cd, radio cd
Також для Pioneer DEH-1300MP: Посібник користувача (21 сторінок)

Друкувати сторінку

Section

Operating this unit

Automatically enhances compressed audio and re-

stores rich sound.

1 Press a or b to select your favorite setting.

OFF (off)—1—2

1 is effective for low compression rates, and 2 is

effective for high compression rates.

FF/REV (fast forward/reverse)

You can switch the search method between fast for-

ward/reverse and searching every 10 tracks. Selecting

ROUGH enables you to search every 10 tracks.

1 Press d to select ROUGH.

FF/REV – Fast forward and reverse

ROUGH – Searching every 10 tracks

To select FF/REV, press c.

2 Press B (BAND/ESC) to return to the playback dis-

play.

3 Press and hold c or d to search every 10 tracks

on a disc (folder).

If the rest of track number is less than 10, press

and hold c or d recalls the first (last) one.

Audio Adjustments

% Press AUDIO to select the audio func-

tion.

After selecting, perform the following proce-

dures to set the audio function.

FAD (fader/balance adjustment)

1 Press a or b to adjust fader (front/rear speaker

balance).

2 Press c or d to adjust the balance (left/right

speaker balance).

BASS/MID/TREBLE (equalizer adjustment)

! Adjusted equalizer curve settings are stored in

CUSTOM.

1 Press a or b to adjust the level.

Adjustment range: +6 to -6

LOUD (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

1 Press a or b to turn loudness on or off.

2 Press c or d to select the desired setting.

LOW (low)—HI (high)

! You can also turn loudness on or off by pressing

and holding E (EQ/LOUD).

SLA (source level adjustment)

SLA (Source Level Adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

! When selecting FM as the source, you cannot

switch to SLA.

! Settings are based on the FM volume level, which

remains unchanged.

! The AM volume level can also be adjusted with

this function.

1 Press a or b to adjust the source volume.

Adjustment range: SLA +4 to SLA –4

Using the equalizer

% Press E (EQ/LOUD) to select the equali-

zer.

DYNAMIC—VOCAL—NATURAL—CUSTOM

—FLAT—POWERFUL

! CUSTOM allows you to create a customized

setting.

Other Functions

Adjusting initial settings

Press SRC/OFF and hold until the unit

turns off.

Press SRC/OFF and hold until the clock

appears in the display.

Press FUNC to select the initial setting.

After selecting, perform the following proce-

dures to set the initial setting.

Setting the clock

1 Press c or d to select the segment of the clock

display you wish to set.

Hour—Minute

2 Press a or b to put a clock right.

AUX (auxiliary input)

Activate this setting when using an auxiliary device

connected to this unit.

1 Press a or b to turn auxiliary setting on or off.

Operating this unit

Displaying the clock

% Press

to turn the clock display on or

off.

# The clock display disappears temporarily

when you perform other operations, but the clock

display appears again after 25 seconds.

Using an AUX source

Insert the stereo mini plug into the

AUX input jack.

Press SRC/OFF to select AUX as the

source.

# AUX cannot be selected unless the auxiliary

setting is turned on. For more details, refer to

AUX (auxiliary input) on the previous page.

Section