Pioneer DEH-4300UB Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Автомобільний приймач Pioneer DEH-4300UB. Pioneer DEH-4300UB 17 сторінок. Cd rds receiver
Також для Pioneer DEH-4300UB: Посібник користувача (49 сторінок)

Друкувати сторінку
Pioneer DEH-4300UB Посібник користувача
Secllon
•
( Operating this unit
)
Secllon
(.....:O~p':....e=..:::r-=a-=ti..:...:n~g~t_h_is_u_n_i_t
) •
SLA
(Source Level Adjustment) lets you adjust the vo·
lume level of each source to prevent radical changes
in volume when switching between sources.
•
Settings are based on the FM volume level, which
remains unchanged.
•
The AM volume level can also be adjusted with
this function.
•
When selecting FM as the source, you cannot
switch to SLA.
II]
Press
M.e.
to display the setting mode.
m
Turn
M.e.
to adjust the source volume.
Adjustment range:
+4
to-4
rn
Press
M.e.
to confirm the selection.
Initial Settings
1 Press S(SRClOFF) and hold until the
unit turns off.
2
Press M.e. and hold until function name
appears in the display.
3 Turn M.e. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
II]
Press
M.e.
to display the setting mode.
m
Press
M.e.
to select the segment of the clock dis-
play you wish to set.
Hour-Minute
rn
Turn
M.e.
to adjust the clock.
Activate this setting when using an auxiliary device
connected to this unit.
II]
Press
M.e.
to turn AUX on or off.
This setting allows you to switch your source to USB/
iPod automatically.
II]
Press
M.e.
to turn the plug and play function on
oroff.
ON - When a USB storage device/iPod is con-
nected, depending on the type of device, the
source is automatically switched to USB/iPod
when you turn on the engine. If you disconnect
your USB storage device/iPod, this unit's source
is turned off.
OFF - When a USB storage device/iPod is con-
nected, the source is not switched to USB/iPod
automatically. Please change the source to USB!
iPod manually.
The rear speaker leads output and RCA output can be
used for full-range speaker or subwoofer connection.
If you switch to REAR-SP:SW, you can connect a rear
speaker lead directly to a subwoofer without using an
auxiliary amp.
Initially, REAR-SP is set for rear full-range speaker
connection (FUL).
II]
Press
M.e.
to display the setting mode.
m
Turn
M.e.
to change the output and press to se-
lect.
REAR-SP-PREOUT
rn
Turn
M.e.
to change the setting.
REAR-SP: FUL-SW
PREOUT: SW-REA
•
Even if you change this setting, there is no
output unless you turn the subwoofer output
on (refer to SUBWOOFER1 (subwoofer on/of(
setting) on the previous page).
•
If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
II]
Press
M.e.
to turn the demo display on or off.
When ever scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
II]
Press
M.e.
to turn the ever scroll on or off.
Seleding the illumination
color
(Function of
DEH-4300UB)
This unit is equipped with multiple-color illu-
mination, You can select a desired color from
the color list.
Dired seledion from the
illumination color list
1
Press M.e. to display the main menu.
2
Turn M.e. to change the menu option
and press to select ILLUMI.
3 Turn M.e. to select the illumination
color.
You can select one option from the following
list.
• 30
preset colors
(WHITE to ROSE)
• SCAN
(cycle through all colors)
• CUSTOM
(customized illumination color)
4
Press M.e. to confirm the selection.
Notes
•
When
SCAN
is selected, the illuminated color
automatically cycles through the
30
preset
colors,
•
When
CUSTOM
is selected, the customized
color saved is selected.
Customizing the illumination color
1
Press M.e. to display the main menu.
2 Turn M.e. to change the menu option
and press to select ILLUMI.
3
Turn M.e. to select the preset color or
CUSTOM illumination color.
•
You cannot create a custom illumination color
when
SCAN
is selected.
4
Press M.e. and hold until the customiz-
ing illumination color setting appears in
the display.
S Press M.e. to select the primary color.
R
(red)-G (green)-B (blue)
6 Turn M.e. to adjust the brightness level.
Adjustment range: 0 to
60
•
You cannot select a level below
10
for all three
of R (red), G (green), and B (blue) at the same
time.
•
You can also perform the same operation on
other colors.
7 Press M.e. and hold until CUSTOM ap-
pears.
0
Using an AUX source
1
Insert the stereo mini plug into the
AUX input jack.
2
Press S(SRClOFF) to select AUX as the
source.
Note
AUX
cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to
AUX
(auxiliary input)
on the previous page,
0
Turning the clock display
on or off
•
Press
12)
to turn the clock display on or
off.
•
The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
[!J
®
En
En
(ill