Pioneer S-DV535W Інструкція з експлуатації - Сторінка 38
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Автомобільний приймач Pioneer S-DV535W. Pioneer S-DV535W 47 сторінок. Dvd/cd receiver; speaker system; digital; wireless speaker system
Друкувати сторінку
09
Additional information
AC adaptor and power cord caution
• Do not leave the power cord near heating
equipment. The coating of the cord may
melt, which could lead to fire and/or
electrocution.
• Make sure to grasp the body of the AC
adaptor when removing it from the power
outlet. If you pull the power cord, it may
become damaged which could lead to fire
and/or electrocution.
• Do not attempt to plug in or remove the AC
adaptor with wet hands. This may result in
electrocution.
• Insert the prongs of the AC adaptor all the
way into the power outlet. If the connection
is incomplete, heat may be generated
which could lead to fire. Furthermore,
contact with the connected prongs of the
adaptor may result in electrocution.
• Do not insert the AC adapter into a power
outlet where the connection remains loose
despite inserting the prongs all the way
into the outlet. Heat may be generated
which could lead to fire. Consult with the
retailer or an electrician regarding replace-
ment of the power outlet.
Moving the wireless speaker
If you need to move the wireless speaker, first
press POWER on the top panel to turn the unit
off, then unplug the power cord.
Radio wave reflections
The radio waves received by the wireless
speaker include the radio wave coming directly
from the transmitter (direct wave) and waves
coming from various directions due to
reflections by walls, furniture and building
(reflected waves). The reflected waves (due to
Note
1 • If there is something obstructing the path between the transmitter and the wireless speaker (such as a metal door, concrete
wall, or insulation containing tinfoil), you may need to change the location of your system to prevent signal noise and interrup-
tions.
• If the transmitter is used near A/V equipment with an antenna input terminal, such as a TV, VCR, BS tuner or CS tuner, you
may experience noise interference on a TV near the transmitter. In such cases, place the transmitter at a larger distance from
the antenna input terminal of the A/V equipment.
38
En
obstacles and reflecting objects) further
produce a variety of reflected waves as well as
variation in reception condition depending on
locations. If the audio cannot be received
properly due to this phenomenon, try moving
the location of the wireless speaker a little. Also
note that audio may be interrupted due to the
reflected waves when a person crosses or
approaches the space between the transmitter
and wireless speaker.
Radio wave caution
This wireless speaker system uses a 2.4GHz
radio wave frequency, which is a band used by
other wireless systems (see list below). To
prevent noise or interrupted communication,
do not use this system nearby such devices, or
make sure these devices are switched off
during use. You can also try switching the
channel on the transmitter (see Transmitter on
page 32) for better reception.
• Cordless phones
• Cordless FAX units
• Wireless broadband routers
• Wireless AV equipment
• Microwave-based health aids
• Microwave ovens
• Wireless controllers for game systems
• Bluetooth equipment
• Some baby monitors
Other, less common, equipment that may
operate on the same frequency:
• Anti-theft systems
• Warehouse logistic management systems
• Amateur radio stations (HAM)
1