Pioneer Super Tuner IIID DEH-P5800MP Посібник з експлуатації - Сторінка 30
Переглянути онлайн або завантажити pdf Посібник з експлуатації для Автомобільний приймач Pioneer Super Tuner IIID DEH-P5800MP. Pioneer Super Tuner IIID DEH-P5800MP 38 сторінок. Owner's manual
Також для Pioneer Super Tuner IIID DEH-P5800MP: Посібник з монтажу (6 сторінок), Посібник користувача (34 сторінок)
Друкувати сторінку
Initial Settings
Adjusting initial settings
Using the initial settings, you can customize various system settings to achieve optimal
performance from this unit.
Function display
Shows the function status.
1. Press SOURCE and hold until the
unit turns off.
2. Press FUNCTION and hold until
function name appears in the display.
3. Press FUNCTION to select one of the initial settings.
Press FUNCTION repeatedly to switch between the following settings:
FM (FM tuning step) – A-PI (auto PI seek) – WARN (warning tone) – AUX (auxiliary
input) – R-SP (rear output and subwoofer controller)
Use the following instructions to operate each particular setting.
• To cancel initial settings, press BAND.
• You can also cancel initial settings by holding down FUNCTION until the unit turns
off.
Setting the FM tuning step
Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100 kHz. It may be preferable to set the
tuning step to 50 kHz when AF is on.
1. Press FUNCTION to select FM.
Press FUNCTION repeatedly until FM appears in the display.
2. Press 4 or 6 to select the FM tuning step.
Pressing 4 or 6 will switch the FM tuning step between 50 kHz and 100 kHz while AF
or TA is on. The selected FM tuning step will appear in the display.
Note
• The tuning step remains at 50 kHz during manual tuning.
Switching Auto PI Seek
The unit can automatically search for a different station with the same programming,
even during preset recall.
1. Press FUNCTION to select A-PI.
Press FUNCTION repeatedly until A-PI appears in the display.
2. Press 8 or 2 to turn A-PI on or off.
Pressing 8 or 2 will turn A-PI on or off and that status will be displayed (e.g., A-PI
:ON).
Switching the warning tone
If the front panel is not detached from the head unit within five seconds of turning off
the ignition, a warning tone will sound. You can turn off the warning tone.
1. Press FUNCTION to select WARN.
Press FUNCTION repeatedly until WARN appears in the display.
2. Press 8 or 2 to turn WARN on or off.
Pressing 8 or 2 will turn WARN on or off and that status will be displayed (e.g., WARN
:ON).
Switching the auxiliary setting
It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting
when using auxiliary equipment connected to this unit.
1. Press FUNCTION to select AUX.
Press FUNCTION repeatedly until AUX appears in the display.
2. Press 8 or 2 to turn AUX on or off.
Pressing 8 or 2 will turn AUX on or off and that status will be displayed (e.g., AUX
:ON).
30