Pioneer SUPER TUNERIII D DEH-P8650MP Інструкція з експлуатації - Сторінка 5
Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Автомобільний приймач Pioneer SUPER TUNERIII D DEH-P8650MP. Pioneer SUPER TUNERIII D DEH-P8650MP 8 сторінок.
Друкувати сторінку
Connection diagram for standard mode
3. DSP switch
Switch the DSP switch
as illustration below.
15 cm
2. This product
1. Antenna jack
4. IP-BUS input
(Blue)
19. Blue/white
6. IP-BUS cable
5. Multi-CD player
(sold separately)
10. Yellow/black
If you use a cellular telephone,
connect it via the Audio Mute lead
on the cellular telephone. If not,
keep the Audio Mute lead free of
any connections.
11. Yellow
12. Fuse holder
To terminal always supplied with
power regardless of ignition switch
position.
13. Red
14. Fuse resistor
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
15. Orange/white
14. Fuse resistor
To lighting switch terminal.
16. Black (ground)
To vehicle (metal) body.
34. With a 2 speaker system, do not
43. This terminal may or
connect anything to the speaker leads
may not be included.
that are not connected to speakers.
17. Connecting cords with RCA pin
plugs (sold separately)
7. Su
ubwoofer output
(L
LOW/SUBWOOFER OUTPUT)
23 cm
8. Rear output
8
(MID/REAR OUTPUT)
9. Front output
9
(HIGH/FRONT OUTPUT)
18. Power amp
15 cm
To system control term
minal of the power
amp or Auto-antenna r
relay control terminal
(max. 300 mA 12 V D
DC).
20. System remote control
+
+
21. Front speak
ker
21. Front speaker
≠
≠
22. White
24. Gray
+
+
21. Front speak
ker
21. Front speaker
≠
≠
23. White/black
25. Gray/black
26. Left
29. Green
31. Violet
+
+
28. Rear spea
aker
28. Rear speaker
≠
≠
30. Green/black
32. Violet/black
+
+
28. Rear spea
aker
28. Rear speaker
≠
≠
+
+
33. Subwoof
fer
33. Subwoofer
≠
≠
35. Perform these connections when using
the optional amplifier.
Connection diagram for 3-way network mode
18. Power amp
(sold separately)
18. Power amp
(sold separately)
4. IP-BUS input
(sold separately)
10. Yellow/black
If you use a cellular telephone,
connect it via the Audio Mute lead
on the cellular telephone. If not,
keep the Audio Mute lead free of
any connections.
11. Yellow
To terminal always supplied with
power regardless of ignition switch
position.
27. Right
13. Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
15. Orange/white
To lighting switch terminal.
16. Black (ground)
To vehicle (metal) body.
43. This terminal may or
may not be included.
Fig. 10
±∞ qJAë
10
36. L
Low range output
3. DSP switch
(L
LOW/SUBWOOFER OUTPUT)
Switch the DSP switch
as illustration below.
23 cm
15 cm
37
7. Middle range output
2. This product
(MID/REAR OUTPUT)
1. Antenna jack
38
8. High range output
(HIGH/FRONT OUTPUT)
(Blue)
15 cm
19. Blue/white
To system control term
minal of the power
6. IP-BUS cable
amp or Auto-antenna r
relay control terminal
(max. 300 mA 12 V D
DC).
5. Multi-CD player
(sold separately)
+
39. High range speak
ker
≠
12. Fuse holder
22. White
+
39. High range speak
ker
≠
23. White/black
26. Left
29. Green
14. Fuse resistor
+
40. Middle range speak
ker
≠
30. Green/black
14. Fuse resistor
+
40. Middle range speak
ker
≠
34. With a 2 speaker system, do not
connect anything to the speaker leads
+
that are not connected to speakers.
41. Low range speak
ker
≠
42. External amp is
required for
connecting the l
low range speaker.
17. Connecting cords with RCA pin
plugs (sold separately)
18. Power amp
(sold separately)
18. Power amp
(sold separately)
18. Power amp
(sold separately)
20. System remote control
+
39. High range speaker
≠
24. Gray
+
39. High range speaker
≠
25. Gray/black
27. Right
31. Violet
+
40. Middle range speaker
≠
32. Violet/black
+
40. Middle range speaker
≠
+
41. Low range speaker
≠
Fig. 11
35. Perform these connections when using
the optional amplifier.
±± qJAë
11