Pioneer X-EM16 Інструкція з експлуатації Посібник з експлуатації - Сторінка 13
Переглянути онлайн або завантажити pdf Інструкція з експлуатації Посібник з експлуатації для Автомобільний приймач Pioneer X-EM16. Pioneer X-EM16 17 сторінок. System
Друкувати сторінку
Listening to the FM radio
Tuning to an FM radio station
• Make sure that you have connected and fully extended the
FM antenna.
∫ Manual tuning
1
Press INPUT on the remote control or INPUT
repeatedly on the main unit to switch the
source to FM.
2
Press MODE repeatedly to select [MANUAL].
3
Press :/9 on the remote control to tune in
to the desired station.
∫ Automatic tuning
1
Press INPUT on the remote control or INPUT
repeatedly on the main unit to switch the
source to FM.
2
Press MODE repeatedly to select [AUTO].
3
Press :/9.
Scanning will start automatically and the tuner will stop at the
first receivable broadcast station.
(For European model only) When you tune to an FM station
that provides RDS services, the service name or station
name appears on the display .
Programming radio stations
• You can program up to 20 preset radio stations.
• To overwrite a programmed radio station, store another
one with its sequence number.
1
Tune to a radio station.
2
Press MEMORY.
3
Press:/9(/) repeatedly to select a
preset number, and then press
"COMPLETE" appears on the display and the radio station is
registered with the preset number.
4
Repeat steps 1-3 to program more stations.
∫ Tuning to a preset radio station
1
Press INPUT on the remote control or INPUT
repeatedly on the main unit to switch the
source to FM.
2
Press MODE repeatedly to select [PRESET].
/ to select the desired preset
3
Press
number
.
If reception of an FM stereo broadcast is noisy, press ST/
MONO repeatedly to select [MONO] to select monaural
reception. This reduces noise.
Other features
∫ Automatic standby mode
• After this product is kept inactive for 15 minutes, it
automatically switches to the standby mode.
Press and hold Í on the remote control or on the main unit.
"AUTO STANDBY ON" or "AUTO STANDBY OFF" is
displayed on the main display, then switches the setting.
The system may not enter standby mode automatically in the
following cases:
• While using the tuner function
• While an audio signal is being detected
• During playback of audio tracks or files
• While the Play Timer or Sleep Timer is being used
The system resets the 15 minute countdown time for
entering standby mode in the following cases:
• When a USB device is connected in USB function
• When a button on the remote or unit is pressed
∫ Turn on and off automatically
You can set a time for automatic power on and off.
• Make sure that you have set the clock before this setup.
1
Press TIMER.
2
Press / to select [PLAY SET], then press
[ON TIME] appers,and the hour digits blink.
Press / to set the hour of
3
press
The minute digits blink.
4
Press / to set the minute, then press
[OFF TIME] appers,and the hour digits blink.
Press / to set the hour of
5
press
The minute digits blink.
.
6
Press / to set the minute, then press
7
Press / to select the source, then press
CD, USB and FM can be selected as the playback source.
• It is possible to move cursor between "hour" and
"minute" settings by :/9.
To check the setting
1
Press TIMER.
Press / to select [SELECT], then press
2
3
Press / to select [PLAY SEL], then press
To cancel the timer
1
Press TIMER.
2
Press / to select [SELECT], then press
3
Press / to select [OFF], then press
∫ Setting the sleep timer
In the working mode, press SLEEP repeatedly to select a
preset period (10, 20, 30, 40, 50, 60, 70, 80, 90 minutes or
AUTO).
• To deactivate the sleep timer, press SLEEP repeatedly
until [OFF] is displayed.
.
ON TIME
.
OFF TIME
.
.
.
.
.
, then
.
, then
.
.
13
En