Pioneer X-HM15BT Інструкція з експлуатації - Сторінка 26

Переглянути онлайн або завантажити pdf Інструкція з експлуатації для Автомобільний приймач Pioneer X-HM15BT. Pioneer X-HM15BT 44 сторінки. Cd receiver system

Pioneer X-HM15BT Інструкція з експлуатації
08
Using the tuner
• If you want to listen to the same program type of another
station, press the RDS PTY whilst the channel number or
station name is flashing. The unit will look for the next
station.
• If no station can be found, "NOT FOUND" will appear for
4 seconds.

Information provided by RDS

Each time the RDS DISPLAY is pressed, the display will switch
as follows:
STANDBY/ON
CD
USB
TUNER
BT AUDIO
CLOCK/TIMER
1
2
3
4
5
6
7
8
9
CLEAR
REPEAT
0
DISPLAY
TUNE+
Station name (PS)
Frequency
When tuning in to a station other than an RDS station or to an
RDS station which sends weak signal, the display will change
in the following order:
Using the Auto Station Program
Memory (ASPM)
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 30 stations
can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
1
Press TUNER on the remote control.
2
Press and hold down RDS ASPM on the
remote control.
After "ASPM" has flashed for about 4 seconds, scanning will
start (87.5 MHz to 108 MHz).
After scanning, the number of stations stored in memory will
be displayed for 4 seconds, and then "END" will appear for 4
seconds.
26
En
OPEN/CLOSE
DISPLAY
FOLDER
TUNE+
AUDIO IN
SLEEP
ENTER
EQUALIZER
MEMORY
MENU
/PROGRAM
P.BASS
PRESET
VOLUME
TUNE–
+
+
BASS/TREBLE
MUTE
RANDOM
DIMMER

FOLDER
RDS
ST/MONO
ASPM
PTY
DISPLAY
SCAN ENTER
DISPLAY
DAB
Programme type (PTY)
Radio text (RT)
No RDS
FM 98.80 MHz
To stop the ASPM operation before it is
complete:
Press  whilst it is scanning for stations. The stations which
are already stored in memory will be kept there.
Note
• If the same station is broadcasting on different
frequencies, the strongest frequency will be stored in
memory.
• Any station which has the same frequency as the one
stored in memory will not be stored.
• If 30 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
• If no station have been stored in memory, "END" will
appear for about 4 seconds.
• If the RDS signals are very weak, station names may not
be stored in memory.
• The same station name can be stored in different
channels.
• In a certain area or during certain time periods, the
station names may temporarily be different.

Notes for RDS operation

If any of the following events occur, it does
not mean that the unit is faulty:
• "PS", "NO PS" and a station name appear alternately,
and properly.
• If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
• When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
• "NO PS", "NO PTY" or "NO RT" will flash for about 5
seconds, and then the frequency will be displayed.
Notes for radio text:
• The first 16 characters of the radio text will appear and
then they will scroll across the display.
• If you tune in to an RDS station which is not
broadcasting any radio text, "NO RT" will be displayed
when you switch to the radio text position.
• Whilst radio text data is received or when the text
contents change, "RT" will be displayed.